R: [linrad] Re: linrad setup error
Alessandro Santucci <
i0skk@...>
2005-12-13 18:12:34 GMT
Hi Roger,
I received your last email and now I'm downloading the new live_cd. I'll try
later on the PC.
What is not so clear for me, is that maybe the live_cd with a PIII cannot
function , and in the case it could be better to make a fixed installation?
Another further question to the mirror friends is: in the case I've to put
the fixed Linux on my HD, what is better for Linrad and with my machine?
Taking into account that I don't want to be so expert in Linux system
management, but mainly in using software for Radio, for experiment. Up to
now I'm involved in QRSS and QRPp beacon listening and I want to check if
Linrad could be a good tool for this too. Yes I know Linux need to be
learned, but I've no so much time for Radio... sig 
Any suggestion is welcome! Thanks!
73
Alex I0SKK
-----Messaggio originale-----
Da: Linrad mailinglist [mailto:linrad@...] Per
conto di
w3sz
Inviato: lunedì 12 dicembre 2005 21.04
A: Linrad mailinglist
Oggetto: [linrad] Re: linrad setup error
Hi, Leif et al,
Knoppix Live DOES use a ramdisk. I do not know how large this generally
is, but I believe Knoppix does some calculations when installing to decide
how big to make this.
I have uploaded a new version of the OSS version of the Linrad Knoppix
Live CD to the website:
http://www.sm5bsz.com/w3sz/knoppixlink.htm
Interestingly [and unfortunately] with this version of the CD which uses
Knoppix 3.8 and Linrad-01.34 and the latest OSS version, the soundcard
selection routine in Linrad is unable to open 4 channels for input such as
is necessary for two receive channels each with I/Q receive. I did not
have this problem with the prior CD and do not know why this has
occurred. It works OK for I/Q sampling of ONE receive channel.
I will check into this as time permits.
73,
Roger
W3SZ
On Mon, 12 Dec 2005 03:57:04 -0500, leif@...
<leif@...>
wrote:
> Hi Alex,
>
>> after a Sunday afternoon passed in download ISO's and check them I was
>> able
>> to make a good CD_live of W3SZ version of Linrad and now my PC load all
>> OK.
>> The new problem I found is that when I am in the S mode and the program
>> ask
>> the parameters, I tried the suggested or to change, but always I receive
>> this message: "Speed far too slow. Try less demanding FFT! Press any
>> key.
> This means that the first fft runs too slowly.
> This is because you have selected a too narrow bandwidth that causes
> a too large size for the fft - but since you have a PIII this should not
> happen easily. My guess is that you ask for too much memory which
> causes swapping to the hard disk. Execution then becomes really slow.....
>
> There is a parameter "Use mlockall to prevent swapping?" in the general
> parameters setup. (You can change it in par_userint with a text editor)
>
> To minimize memory requirements, deselect second fft and AFC.
> Set minimum fft1 storage time and minimum baseband storage time.
> Once Linrad starts you will get a message on screen that shows how
> large data areas you allocate. 256MB should be plenty, but maybe
> some other process is running that uses up memory or cpu time?
> I do not know anything about the Knoppix live CD. Maybe it uses
> a RAM disk?
>
> 73
>
> Leif / SM5BSZ
>
>
>> Accept...." I made a lot of test but I've always the same answer: I see
>> the
>> PC making calculations but at the end I have always this answer. Do I
>> make
>> any error? Or not?
>> I read all the mailing list message but I did not find any similar
>> question,
>> and moreover I didn't find any error message list in order to understand
>> what can I do to solve this?
>> May I have any help from someone that had the same?
>>
>> I remember my PC is PIII 870 MHz CPU, 256 RAM, video Matrox 4000 16 Mb.
>>
>> Thanks in advance from a newbie/Elmer on this side....
>>
>> Alex I0SKK
>>
>
> #############################################################
> This message is sent to you because you are subscribed to
> the mailing list <linrad@...>.
> To unsubscribe, E-mail to: <linrad-off@...>
> To switch to the DIGEST mode, E-mail to
> <linrad-digest@...>
> To switch to the INDEX mode, E-mail to
> <linrad-index@...>
> Send administrative queries to <linrad-request@...>
>
--
Roger Rehr
W3SZ
http://www.qsl.net/w3sz
#############################################################
This message is sent to you because you are subscribed to
the mailing list <linrad@...>.
To unsubscribe, E-mail to: <linrad-off@...>
To switch to the DIGEST mode, E-mail to
<linrad-digest@...>
To switch to the INDEX mode, E-mail to <linrad-index@...>
Send administrative queries to <linrad-request@...>
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.371 / Virus Database: 267.13.13/197 - Release Date: 09/12/2005
--
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.371 / Virus Database: 267.13.13/197 - Release Date: 09/12/2005
#############################################################
This message is sent to you because you are subscribed to
the mailing list <linrad@...>.
To unsubscribe, E-mail to: <linrad-off@...>
To switch to the DIGEST mode, E-mail to <linrad-digest <at> antennspecialisten.se>
To switch to the INDEX mode, E-mail to <linrad-index <at> antennspecialisten.se>
Send administrative queries to <linrad-request@...>
RSS Feed