Re: terratec cinergy 400 cardbus

it seems i have got some stations with scantv ;)
these are the channels i have expected, 24, 34 and E5.

how it works?

with suse kotd

reinhard <at> thorb:~> uname -r
2.6.11.4-20050429220005-default

and v4l snapshot video4linux-20050403-221421.tar.gz

i booted with the card inserted.
later i eject the card and inserted again.
when i boot i get these i2c errors again.
when i insert the card, i have not got these errors, dont know why.

if i consult dmesg, it shows these messages when ejecting the card

saa7133[0]/irq[10,10737410]: r=0xffffffff s=0xffffffff DONE_RA0 DONE_RA1 
DONE_RA2 DONE_RA3 AR PE PWR_ON RDCAP INTL FIDT MMC TRIG_ERR CONF_ERR 
LOAD_ERR GPIO16? GPIO18 GPIO22 GPIO23 | RA0=vbi,b,odd,15
saa7133[0]/irq: looping -- clearing PE (parity error!) enable bit
saa7133[0]/irq[0,10737414]: r=0xffffffff s=0xffffffff DONE_RA0 DONE_RA1 
DONE_RA2 DONE_RA3 AR PE PWR_ON RDCAP INTL FIDT MMC TRIG_ERR CONF_ERR 
LOAD_ERR GPIO16? GPIO18 GPIO22 GPIO23 | RA0=vbi,b,odd,15

....

saa7133[0]/irq[10,10737414]: r=0xffffffff s=0xffffffff DONE_RA0 DONE_RA1 
DONE_RA2 DONE_RA3 AR PE PWR_ON RDCAP INTL FIDT MMC TRIG_ERR CONF_ERR 
LOAD_ERR GPIO16? GPIO18 GPIO22 GPIO23 | RA0=vbi,b,odd,15
saa7133[0]/irq: looping -- clearing PE (parity error!) enable bit
saa7133[0]/irq[42,10737441]: r=0xffffffff s=0xffffffff DONE_RA0 DONE_RA1 
DONE_RA2 DONE_RA3 AR PE PWR_ON RDCAP INTL FIDT MMC TRIG_ERR CONF_ERR 
LOAD_ERR GPIO16? GPIO18 GPIO22 GPIO23 | RA0=vbi,b,odd,15

dont know what it means.

GPIO16?

regards
reinhard

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request <at> redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list