New unsupported Tuner on Hauppage WinTV PVR 350

Hi,

I hope this is the right place... The ivtv driver isn't going to work at the
moment on my new Hauppage PVR 350; It seems that Hauppage has switch to a
new Tuner on their cards; The silver casing only has a text "Microtune" on
it. What can I/we do to make this tuner supported as well? Dump from kernel
logs is below (I hardcoded set the Tunertype (not valid) to "3".

tuner(bttv): type forced to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF,
FR1216MF)) [insmod]

But that's not the right one (according to the tveeprom module of ivtv):

tvee: Hauppauge: model=48139, rev=J352, serial#=6816583
tvee: tuner=<unknown> (idx=52, type=-1)

I hope we can sort this out....

Klaasjan

Complete DUMP:

i2c-core.o: i2c core module
Linux video capture interface: v1.00
i2c-algo-bit.o: i2c bit algorithm module
i2c-core.o: driver i2c TV tuner driver registered.
i2c-core.o: driver saa7115 registered.
i2c-core.o: driver i2c msp3400 driver registered.
ivtv: version 0.1.9 (release) loading
ivtv: SGarray_size = 340, DSGarray_size = 16
ivtv: Found an iTVC15 based chip
tuner: chip found  <at>  0xc2
tuner(bttv): type forced to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF,
FR1216MF)) [insmod]
i2c-core.o: client [Philips (SECAM+PAL_BG) (FI1216M] registered to adapter
[ivtv i2c driver #0](pos. 0).
status: (1E) 0x48, (1F) 0xc0
i2c-core.o: client [saa7115[0]] registered to adapter [ivtv i2c driver
#0](pos. 1).
msp34xx: setvolume: mute=off 59343:59343  v=0x73 b=0x00
msp34xx: init: chip=MSP3418W-A2, has NICAM support
msp3410: daemon started
i2c-core.o: client [MSP3418W-A2] registered to adapter [ivtv i2c driver
#0](pos. 2).
i2c-core.o: adapter ivtv i2c driver #0 registered as adapter 0.
msp3410: setting mode: 4.5  M BTSC-Stereo (0x0020)
msp3410: current mode: 4.5  M BTSC-Stereo (0x0020)
msp3400: BTSC setstereo: stereo
msp3400: setstereo final source/matrix = 0x320
msp34xx: setbass: 32768 0x00
msp34xx: settreble: 32768 0x00
msp34xx: setvolume: mute=off 59343:59343  v=0x73 b=0x00
msp3410: status=0x6 (pri=no, sec=no, mono)
msp34xx: watch: stereo 2 => 1
msp3400: BTSC setstereo: mono
msp3400: setstereo final source/matrix = 0x300
ivtv: Encoder revision: 0x02040011
ivtv: Decoder revision: 0x02020023
tuner: tv freq set to 67.25
tuner: tv 0x06 0xa3 0x8e 0xa5
msp34xx: MSP_SET_MATRIX
msp34xx: scart switch: in1 da => 1
ivtv: Registered v4l2 device, minor 0
ivtv: Registered v4l2 device, minor 32
ivtv: Registered v4l2 device, minor 224
ivtv: Registered v4l2 device, minor 16
ivtv: loaded
i2c-core.o: driver tveeprom registered.
tveeprom.c: starting probe for adapter ivtv i2c driver #0 (0x10005)
tveeprom.c: detecting tveeprom client on address 0xa0
  9 [04] 20 77 00 40 47 03 68 00 
  3 [05] 99 00 
  8 [06] 0b bc 00 00 52 35 a9 
  2 [07] 70 
Not sure what to do with tag [07]
  3 [09] 13 5f 
Not sure what to do with tag [09]
  3 [0a] 74 34 
  3 [0b] 59 8c 
Not sure what to do with tag [0b]
  2 [0e] 01 
  2 [0f] 01 
Not sure what to do with tag [0f]
  2 [10] 01 
Not sure what to do with tag [10]
  2 [11] 00 
Not sure what to do with tag [11]
tvee: Hauppauge: model=48139, rev=J352, serial#=6816583
tvee: tuner=<unknown> (idx=52, type=-1)
tvee: tuner fmt=PAL(D/K) (eeprom=0x74, v4l2=0x00400e17)
tvee: audio_processor=CS5331 (type=9)

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request <at> redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list