Raju,

But if IP address (and UDP port) is the same in both SDP sessions:

LocalControl {
   ReservedGroup = true
},
Local {
   v=0
   c=IN IP4 adrressX
   m=audio portA RTP/AVP 2

   v=0
   c=IN IP4 adrressX
   m=audio portA RTP/AVP 8
}

then there could not be 2 simultaneous media sessions. In that caso, would there be any differnce with?:

LocalControl { ReservedValue = true }, Local { v=0 c=IN IP4 adrressX m=audio portA RTP/AVP 2 8 }

El 09/12/2011 19:21, Makaraju, Maridi Raju (Raju) escribió:

Javi,

 

For Case A with ReservedValue, MGW only reserves one RTP+ip. So, only one media session can be carried over, but the session

can use either payload formats 2 or 8.

For case B ReservedGroup, MGW reserves and returns 2 different RTP+IP addresses (if resources are available), one for each group.

There could be 2 simultaneous media sessions carried using payload formats 2 and 8 respectively, until reservedGroup is set to false.

Please note that reservedGroup can be kept ON until the termination is Subtracted.

 

Regards

Raju

From: megaco-bounces <at> ietf.org [mailto:megaco-bounces <at> ietf.org] On Behalf Of Javi
Sent: Friday, December 09, 2011 12:07 PM
To: megaco <at> ietf.org
Subject: [Megaco] Several SDP session in a Local or Remote Descriptor

In a call, which is the difference between these two options (UDP port and IP address are the same in both?

Case A):
LocalControl { ReservedValue = true }, Local { v=0 c=IN IP4 adrressX m=audio portA RTP/AVP 2 8 } Case B):

LocalControl {
   ReservedGroup = true
},
Local {
   v=0
   c=IN IP4 $
   m=audio portA RTP/AVP 2

   v=0
   c=IN IP4 $
   m=audio portA RTP/AVP 8
}


Regards,

Javi

_______________________________________________
Megaco mailing list
Megaco <at> ietf.org
https://www.ietf.org/mailman/listinfo/megaco