4 Dec 2006 08:35
Re: watchdog / lm77 WRAP / olsrd-plugin (Voyage current )
Kim-man 'Punky' TSE <punkytse@...>
2006-12-04 07:35:28 GMT
2006-12-04 07:35:28 GMT
Hi Fred, I have the latest voyage-current running and don't have problem installing olsrd. openssl is installed properly. For the temperature sensors, you may unload the modules and reload it: modprobe -r lm77 acx200_acx modprobe acx200_acx base=0x810,0x820 modprobe lm77 The temperature reading may reappear in sysfs. Just like Micheal said, I heard about there will be no temperature sensor for the latest WRAP 2 (not sure about WRAP 1). Correct me I am wrong. But all of my old WRAP boards still have it. Regards, Punky =============================================== voyage:~# apt-get install olsrd olsrd-plugin Reading package lists... Done Building dependency tree... Done The following extra packages will be installed: openssl Suggested packages: olsrd-gui ca-certificates The following NEW packages will be installed: olsrd olsrd-plugin openssl 0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. Need to get 1269kB of archives. After unpacking 3072kB of additional disk space will be used. Do you want to continue [Y/n]? WARNING: The following packages cannot be authenticated! olsrd openssl olsrd-plugin Authentication warning overridden. Get:1 http://www.voyage.hk ./ olsrd 0.4.10-1 [119kB] Get:2 http://mirrors.geekbone.org etch/main openssl 0.9.8c-4 [1004kB] Get:3 http://www.voyage.hk ./ olsrd-plugin 0.4.10-1 [146kB] Fetched 1269kB in 2s (534kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously deselected package olsrd. (Reading database ... 7388 files and directories currently installed.) Unpacking olsrd (from .../olsrd_0.4.10-1_i386.deb) ... Selecting previously deselected package openssl. Unpacking openssl (from .../openssl_0.9.8c-4_i386.deb) ... Selecting previously deselected package olsrd-plugin. Unpacking olsrd-plugin (from .../olsrd-plugin_0.4.10-1_i386.deb) ... Setting up olsrd (0.4.10-1) ... Not starting olsrd daemon, disabled via /etc/default/olsrd Setting up openssl (0.9.8c-4) ... Setting up olsrd-plugin (0.4.10-1) ... =============================================== Frederico Marques wrote: > Hi list, > > I'm a newbie user with Voyage, and I have some questions regarding the > setup of watchdog/lm77 on a WRAP board. I'm testing the 0.3pre1 and > voyage-current tarball (3 Dez). I'm following the guidelines of the > README file: > > <http://cvs.voyage.hk/cgi-bin/viewcvs.cgi/voyage-custom/src/stage1/overlay_fs/README?rev=1.2> > > > First, the configuration of the watchdog, everything is ok with the > kernel module wd1100, but I don't have a /dev/wd, instead a > /dev/watchdog: > > # ls -al /dev/watchdog > crw-
rw---- 1 root root 10, 130 Jan 1 2000 /dev/watchdog > > Also, I noticed that a process child of the watchdog daemon is > constantly trashing (defunct): > > 2985 ? SLs 0:00 /usr/sbin/watchdog > 3295 ? Z 0:00 \_ [watchdog] <defunct> > > > Am I doing something wrong? Should I make a /dev/wd device, as > described on the README or should I use this /dev/watchdog? > > Another question, the kernel modules lm77 and scx200_acb are loaded > nicely at /etc/modules but I can't read the temperature: > > # cat /sys/bus/i2c/drivers/lm77/0-0048/temp1_input > cat: /sys/bus/i2c/drivers/lm77/0-0048/temp1_input: No such file or > directory > > Following the wiki guide on WRAP: > > # cat /sys/bus/i2c/devices/0-0048/temp1_input > cat: /sys/bus/i2c/devices/0-0048/temp1_input: No such file or directory > > No luck, either. > > One last question, I'm trying to install the olsrd-plugins package: > > voyage:~# remountrw > voyage:~# apt-get install olsrd-plugins > Reading package lists... Done > Building dependency tree... Done > E: Couldn't find package olsrd-plugins > voyage:~# apt-get install olsrd-plugin > Reading package lists... Done > Building dependency tree... Done > Some packages could not be installed. This may mean that you have > requested an impossible situation or if you are using the unstable > distribution that some required packages have not yet been created > or been moved out of Incoming. > > Since you only requested a single operation it is extremely likely that > the package is simply not installable and a bug report against > that package should be filed. > The following information may help to resolve the situation: > > The following packages have unmet dependencies: > olsrd-plugin: Depends: openssl (>= 0.9.6) but it is not installable > E: Broken packages > > > No luck, but I have the ssl library: > > voyage:~# dpkg --list |grep ssl > ii libssl0.9.8 0.9.8c-3 > SSL shared libraries > > Is there any repository or teste olsrd package for this release? I'm > thinking in building a new olsrd package for the current pre voyage > release. > > Thankx for any help and great distro! > > --fred > > > _______________________________________________ > Voyage-linux mailing list > Voyage-linux@... > http://list.voyage.hk/mailman/listinfo/voyage-linux -- -- Regards, Punky P U N K N ! X . c o m Technology + Lifestyle (http://www.punknix.com) V O Y A G E . H K - http://www.voyage.hk Linux - voyage-0.2 is released! Store - New Senao NMP-8601 and NMP-8602 (100mW) in stock! - New low price for Senao NMP-8602 Plus (400mW)!