Re: LSI MegaCli and SAS6/iR in PowerEdge R200

* J. Epperson <Dell <at> epperson.homelinux.net> [2008-02-01 17:16]:
> On Fri, February 1, 2008 10:58, Patrick_Boyd <at> dell.com wrote:
> > My recommendation? OMSA it works for PERC 3/4/5/6, CERC, and SAS 5/6. No
> > other tool does that.
> >
> 
> Fine if you need a tool that does all that OMSA does, like a Swiss Army
> Knife.  Kind of bloated if all you are after is command-line status
> checking.

Seconded.

> The mptfusion/mptsas CLI tool was mpt-status through the SAS
> 5/iR, bet it also works with 6/iR.

Confirmed -- it works with SAS6/iR as well :)
Thanks!

Unfortunately it can only output the status but not manage the
RAID/controller... but better than nothing!
--

-- 
Regards,
Wolfram Schlich <wschlich <at> gentoo.org>
Gentoo Linux * http://dev.gentoo.org/~wschlich/

_______________________________________________
Linux-PowerEdge mailing list
Linux-PowerEdge <at> dell.com
http://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq