Re: (no subject)

Hi,

WPA support in DriverLoader is only enabled when the installed Windows 
driver does support it. To see if WPA is supported by the installed 
Windows driver, please run the following command in a root shell:

---
cat /proc/driver/driverloader/≤iface>/capabilities
---

In the previous command, "<iface>" should be replaced with the name of 
the wireless interface, for example, eth1, wlan0, etc...

If you see either WPA or WPA2 in the output of the command, you should 
be able to use dldr_wpa_supplicant with DriverLoader for that wireless 
interface.

Regards,

Jonathan
Technical specialist / Linuxant
www.linuxant.com
support <at> linuxant.com

K M Prasanna-A14602 wrote:
> Thanks Jonathan.
> Please suggest whether Cisco 350 series WLAN card can work with
> dldr_wpa_supplicant.
> 
> Thanks & Regards
> Prasanna
>  
> 
> -----Original Message-----
> From: driverloader-bounces <at> lists.linuxant.com
> [mailto:driverloader-bounces <at> lists.linuxant.com] On Behalf Of Linuxant
> support (Jonathan)
> Sent: Wednesday, November 29, 2006 9:45 PM
> To: K M Prasanna-A14602
> Cc: driverloader <at> lists.linuxant.com
> Subject: Re: [driverloader] (no subject)
> 
> Hi,
> 
> on Fedora Core 5 with a laptop, we recommend using NetworkManager for a
> user friendly way to setup a wireless connection. This tool is also able
> to deal with WPA.
> 
> Alternatively, you could use dldr_wpa_supplicant available at:
> 
> http://www.linuxant.com/driverloader/wlan/full/downloads.php#wpa
> 
> This package comes with a script will greatly help setup WPA. Simply run
> the 'dldrwpaconfig' command in a root shell when the package is
> installed to setup WPA.
> 
> For the problem with yum, please make sure that you have an active
> Internet connection when you use that tool, it is quite possible that it
> is the cause of the error message you have reported.
> 
> Regards,
> 
> 
> Jonathan
> Technical specialist / Linuxant
> www.linuxant.com
> support <at> linuxant.com
> 
> 
> 
> K M Prasanna-A14602 wrote:
>> Hi,
>> I would like to use WPA.
>>  
>> I use Dell Latitude D610 laptop with Cisco 350 series WLAN card. 
>> Laptop has Fedore core 5 linux installed and kernel version is 
>> 2.6.15-1.2054_FCS. Wireless extension version used is 19. Access point
> 
>> from D-Link is used.
>>  
>> Can you please suggest on how to get WPA working? (or point me to a 
>> link on the web where we get step-by-step procedure) .
>>  
>> Appreciate your help. Thanks in advance.
>>  
>> --------
>> In a root shell, i tried executing 'yum install NetworkManager-gnome' 
>> but got the following error.
>> Cannot find a valid baseurl fr repo: core
>>  
>> Regards
>> Prasanna
>>
>>
>> ----------------------------------------------------------------------
>> --
>>
>> _______________________________________________
>> driverloader mailing list
>> driverloader <at> lists.linuxant.com
>> https://www.linuxant.com/mailman/listinfo/driverloader
> _______________________________________________
> driverloader mailing list
> driverloader <at> lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/driverloader
> _______________________________________________
> driverloader mailing list
> driverloader <at> lists.linuxant.com
> https://www.linuxant.com/mailman/listinfo/driverloader