29 Jun 15:23
Re: ACPI issues on HP DL585 G2
Stephen Frost <sfrost <at> snowman.net>
2009-06-29 13:23:02 GMT
2009-06-29 13:23:02 GMT
Yinghai, * Yinghai Lu (yhlu.kernel <at> gmail.com) wrote: > On Sun, Jun 28, 2009 at 6:57 PM, Stephen Frost<sfrost <at> snowman.net> wrote: > > They might not.. Â I did upgrade the BIOS to the latest revision and I > > don't recall if the last 2.6.22 boot was before or after the BIOS > > upgrade. Â The 2.6.29 and 2.6.30 boots (both w/o APIC) are from the same > > BIOS. Â Would it help to try booting under 2.6.22 with the BIOS that's on > > there now? > > that would help attached. > > > > Is there some other information I could provide while the machine is > > running? Â Unfortunately, this is a rather important box for us. > > put debug in /boot/grub/grub.conf for the kernel > and boot with serial console enabled... > to capture all. attached. Thanks, Stephen
Linux version 2.6.22-3-amd64 (Debian 2.6.22-6) (maks <at> debian.org) (gcc version 4.1.3 20071019
(prerelease) (Debian 4.1.2-17)) #1 SMP Sun Nov 4 18:18:09 UTC 2007
Command line: root=/dev/cciss/c0d0p1 ro debug
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fe4e000 (usable)
BIOS-e820: 000000007fe4e000 - 000000007fe56000 (ACPI data)
BIOS-e820: 000000007fe56000 - 000000007fe57000 (usable)
BIOS-e820: 000000007fe57000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000047ffff000 (usable)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 523854) 1 entries of 3200 used
Entering add_active_range(0, 523862, 523863) 2 entries of 3200 used
Entering add_active_range(0, 1048576, 4718591) 3 entries of 3200 used
end_pfn_map = 4718591
DMI 2.4 present.
ACPI: RSDP 000F4F00, 0024 (r2 HP )
ACPI: XSDT 7FE4ED00, 0074 (r1 HP ProLiant 2 Ò 162E)
ACPI: FACP 7FE4ED80, 00F4 (r3 HP A07 2 Ò 162E)
ACPI: DSDT 7FE4EE80, 498A (r1 HP DSDT 1 INTL 20030228)
ACPI: FACS 7FE4E100, 0040
ACPI: SPCR 7FE4E140, 0050 (r1 HP SPCRRBSU 1 Ò 162E)
ACPI: HPET 7FE4E1C0, 0038 (r1 HP ProLiant 2 Ò 162E)
ACPI: SPMI 7FE4E200, 0040 (r5 HP ProLiant 1 Ò 162E)
ACPI: ERST 7FE4E240, 01D0 (r1 HP ProLiant 1 Ò 162E)
ACPI: APIC 7FE4E440, 00C6 (r1 HP ProLiant 2 0)
ACPI: SRAT 7FE4E580, 01A0 (r1 AMD FAM_F_10 2 AMD 1)
ACPI: FFFF 7FE4E980, 0176 (r1 HP ProLiant 1 Ò 162E)
ACPI: BERT 7FE4EB00, 0030 (r1 HP ProLiant 1 Ò 162E)
ACPI: HEST 7FE4EB40, 0170 (r1 HP ProLiant 1 Ò 162E)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: PXM 2 -> APIC 4 -> Node 2
SRAT: PXM 2 -> APIC 5 -> Node 2
SRAT: PXM 3 -> APIC 6 -> Node 3
SRAT: PXM 3 -> APIC 7 -> Node 3
SRAT: Node 0 PXM 0 0-a0000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
SRAT: Node 0 PXM 0 0-80000000
Entering add_active_range(0, 0, 159) 1 entries of 3200 used
Entering add_active_range(0, 256, 523854) 1 entries of 3200 used
Entering add_active_range(0, 523862, 523863) 2 entries of 3200 used
SRAT: Node 0 PXM 0 0-180000000
Entering add_active_range(0, 0, 159) 3 entries of 3200 used
Entering add_active_range(0, 256, 523854) 3 entries of 3200 used
Entering add_active_range(0, 523862, 523863) 3 entries of 3200 used
Entering add_active_range(0, 1048576, 1572864) 3 entries of 3200 used
SRAT: Node 1 PXM 1 180000000-280000000
Entering add_active_range(1, 1572864, 2621440) 4 entries of 3200 used
SRAT: Node 2 PXM 2 280000000-380000000
Entering add_active_range(2, 2621440, 3670016) 5 entries of 3200 used
SRAT: Node 3 PXM 3 380000000-480000000
Entering add_active_range(3, 3670016, 4718591) 6 entries of 3200 used
NUMA: Using 31 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000180000000
Bootmem setup node 1 0000000180000000-0000000280000000
Bootmem setup node 2 0000000280000000-0000000380000000
Bootmem setup node 3 0000000380000000-000000047ffff000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 4718591
early_node_map[7] active PFN ranges
0: 0 -> 159
0: 256 -> 523854
0: 523862 -> 523863
0: 1048576 -> 1572864
1: 1572864 -> 2621440
2: 2621440 -> 3670016
3: 3670016 -> 4718591
On node 0 totalpages: 1048046
DMA zone: 56 pages used for memmap
DMA zone: 1034 pages reserved
DMA zone: 2909 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 505479 pages, LIFO batch:31
Normal zone: 7168 pages used for memmap
Normal zone: 517120 pages, LIFO batch:31
On node 1 totalpages: 1048576
DMA zone: 0 pages used for memmap
DMA32 zone: 0 pages used for memmap
Normal zone: 14336 pages used for memmap
Normal zone: 1034240 pages, LIFO batch:31
On node 2 totalpages: 1048576
DMA zone: 0 pages used for memmap
DMA32 zone: 0 pages used for memmap
Normal zone: 14336 pages used for memmap
Normal zone: 1034240 pages, LIFO batch:31
On node 3 totalpages: 1048575
DMA zone: 0 pages used for memmap
DMA32 zone: 0 pages used for memmap
Normal zone: 14335 pages used for memmap
Normal zone: 1034240 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
Processor #4
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
Processor #6
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Processor #3
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
Processor #5
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
Processor #7
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xd9cf0000] gsi_base[0])
IOAPIC[0]: apic_id 8, address 0xd9cf0000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xd9fd0000] gsi_base[24])
IOAPIC[1]: apic_id 9, address 0xd9fd0000, GSI 24-30
ACPI: IOAPIC (id[0x0a] address[0xd9fe0000] gsi_base[31])
IOAPIC[2]: apic_id 10, address 0xd9fe0000, GSI 31-37
ACPI: IOAPIC (id[0x0b] address[0xd9ff0000] gsi_base[38])
IOAPIC[3]: apic_id 11, address 0xd9ff0000, GSI 38-61
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
ACPI: NMI_SRC (dfl dfl global_irq 28)
ACPI: NMI_SRC (dfl dfl global_irq 35)
Setting APIC routing to flat
ACPI: HPET id: 0x10228201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
swsusp: Registered nosave memory region: 000000007fe4e000 - 000000007fe56000
swsusp: Registered nosave memory region: 000000007fe57000 - 0000000080000000
swsusp: Registered nosave memory region: 0000000080000000 - 00000000e0000000
swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000
swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fec00000
swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fed00000
swsusp: Registered nosave memory region: 00000000fed00000 - 00000000fee00000
swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee10000
swsusp: Registered nosave memory region: 00000000fee10000 - 00000000ffc00000
swsusp: Registered nosave memory region: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
SMP: Allowing 8 CPUs, 0 hotplug CPUs
PERCPU: Allocating 37896 bytes of per cpu data
Built 4 zonelists. Total pages: 4128228
Kernel command line: root=/dev/cciss/c0d0p1 ro debug
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 2812.969 MHz processor.
Console: colour VGA+ 80x25
Checking aperture...
CPU 0: aperture @ 20000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 4000000
Memory: 16438936k/18874364k available (2008k kernel code, 336156k reserved, 945k data, 296k init)
Calibrating delay using timer specific routine.. 5629.02 BogoMIPS (lpj=11258051)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 12557905
Detected 12.557 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/8 APIC 0x2
Initializing CPU#1
Calibrating delay using timer specific routine.. 5625.95 BogoMIPS (lpj=11251916)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/2 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 2/8 APIC 0x4
Initializing CPU#2
Calibrating delay using timer specific routine.. 5626.12 BogoMIPS (lpj=11252243)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 2/4 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 0
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 3/8 APIC 0x6
Initializing CPU#3
Calibrating delay using timer specific routine.. 5626.08 BogoMIPS (lpj=11252169)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 3/6 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 4/8 APIC 0x1
Initializing CPU#4
Calibrating delay using timer specific routine.. 5626.05 BogoMIPS (lpj=11252119)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 4/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 5/8 APIC 0x3
Initializing CPU#5
Calibrating delay using timer specific routine.. 5625.96 BogoMIPS (lpj=11251922)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 5/3 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 6/8 APIC 0x5
Initializing CPU#6
Calibrating delay using timer specific routine.. 5625.94 BogoMIPS (lpj=11251896)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 6/5 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 1
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 7/8 APIC 0x7
Initializing CPU#7
Calibrating delay using timer specific routine.. 5625.97 BogoMIPS (lpj=11251944)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 7/7 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 1
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Brought up 8 CPUs
migration_cost=461,611
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: SSDT 7FE58000, 0AC4 (r2 HP PNOWSSDT 2 HP 1)
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:40)
PCI: Probing PCI hardware (bus 40)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE3._PRT]
ACPI: PCI Interrupt Link [LNKW] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LNKX] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [LNKY] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [LNKZ] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [LNU0] (IRQs 22) *5
ACPI: PCI Interrupt Link [LNU2] (IRQs 23) *11
ACPI: PCI Interrupt Link [LNKA] (IRQs 54) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: ACPI device : hid PNP0A03
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid IPI0001
pnp: ACPI device : hid PNP0103
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0303
pnp: ACPI device : hid PNP0F13
pnp: ACPI device : hid PNP0A06
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0003
pnp: ACPI device : hid PNP0A03
pnp: ACPI device : hid PNP0003
pnp: ACPI device : hid PNP0003
pnp: ACPI device : hid PNP0003
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NET: Registered protocol family 8
NET: Registered protocol family 20
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
Time: hpet clocksource has been installed.
ACPI: RTC can wake from S4
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:01' and the driver 'system'
pnp: 00:01: ioport range 0x408-0x40f has been reserved
pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:01: ioport range 0x700-0x73f has been reserved
PCI: Bridge: 0000:00:09.0
IO window: 1000-2fff
MEM window: d9d00000-d9efffff
PREFETCH window: d0000000-d7ffffff
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
PCI: Bridge: 0000:40:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:40:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:40:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:40:0e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:40:10.0
IO window: disabled.
MEM window: da000000-ddffffff
PREFETCH window: 88000000-880fffff
PCI: Bridge: 0000:40:11.0
IO window: 3000-3fff
MEM window: dfe00000-dfefffff
PREFETCH window: 88100000-881fffff
PCI: Setting latency timer of device 0000:40:0b.0 to 64
PCI: Setting latency timer of device 0000:40:0c.0 to 64
PCI: Setting latency timer of device 0000:40:0d.0 to 64
PCI: Setting latency timer of device 0000:40:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 2097152 (order: 13, 50331648 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 2097152 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 7574k freed
audit: initializing netlink socket (disabled)
audit(1246277507.840:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Found enabled HT MSI Mapping on 0000:00:0c.0
PCI: Found enabled HT MSI Mapping on 0000:00:0d.0
PCI: Found enabled HT MSI Mapping on 0000:00:0e.0
Boot video device is 0000:01:03.0
pci 0000:01:04.4: HCRESET not completed yet!
PCI: Found enabled HT MSI Mapping on 0000:40:0b.0
PCI: Found enabled HT MSI Mapping on 0000:40:0c.0
PCI: Found enabled HT MSI Mapping on 0000:40:0d.0
PCI: Found enabled HT MSI Mapping on 0000:40:0e.0
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
PCI: Setting latency timer of device 0000:40:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:40:0b.0:pcie00]
PCI: Setting latency timer of device 0000:40:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:40:0c.0:pcie00]
PCI: Setting latency timer of device 0000:40:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:40:0d.0:pcie00]
PCI: Setting latency timer of device 0000:40:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:40:0e.0:pcie00]
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:09' and the driver 'serial'
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:06' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
pnp: match found with the PnP device '00:07' and the driver 'i8042 aux'
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 296k freed
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNU2] -> GSI 23 (level, high) -> IRQ 23
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 23, io mem 0xd9cd0000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
pnp: the driver 'ide' has been registered
SCSI subsystem initialized
HP CISS Driver (v 3.6.14)
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 163
ACPI: PCI Interrupt 0000:42:02.0[A] -> GSI 26 (level, low) -> IRQ 26
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.5.11 (June 4, 2007)
ACPI: PCI Interrupt 0000:41:01.0[A] -> GSI 31 (level, low) -> IRQ 31
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev a3) UDMA133 controller
ide0: BM-DMA at 0x0500-0x0507, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem dc000000, IRQ 31,
node addr 001cc4f094fa
ACPI: PCI Interrupt 0000:41:02.0[A] -> GSI 32 (level, low) -> IRQ 32
eth1: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem da000000, IRQ 32,
node addr 001cc4f094fc
cciss0: <0x3220> at PCI 0000:42:02.0 IRQ 26 using DAC
blocks= 286677120 block_size= 512
heads=255, sectors=32, cylinders=35132
blocks= 860051248 block_size= 512
heads=255, sectors=32, cylinders=105399
blocks= 286677120 block_size= 512
heads=255, sectors=32, cylinders=35132
cciss/c0d0: p1 p2
blocks= 860051248 block_size= 512
heads=255, sectors=32, cylinders=105399
cciss/c0d1: unknown partition table
usb 1-6: new high speed USB device using ehci_hcd and address 3
usb 1-6: configuration #1 chosen from 1 choice
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
hda: HL-DT-ST DVDRAM GSA-T20L, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
libata version 2.21 loaded.
hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNU0] -> GSI 22 (level, high) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 22, io mem 0xd9ce0000
USB Universal Host Controller Interface driver v3.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17
ACPI: PCI Interrupt 0000:01:04.4[B] -> Link [LNKX] -> GSI 17 (level, high) -> IRQ 17
uhci_hcd 0000:01:04.4: UHCI Host Controller
uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 3
uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:04.4: HCRESET not completed yet!
uhci_hcd 0000:01:04.4: irq 17, io base 0x00001800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel <at> redhat.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb 2-3: new low speed USB device using ohci_hcd and address 2
usb 2-3: configuration #1 chosen from 1 choice
udev: starting version 141
udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev
features will not work correctly
usb 3-1: new full speed USB device using uhci_hcd and address 2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0
shpchp: shpc_init: cannot reserve MMIO region
shpchp: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0
shpchp: shpc_init: cannot reserve MMIO region
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pnp: the driver 'rtc_cmos' has been registered
pnp: match found with the PnP device '00:0a' and the driver 'rtc_cmos'
rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
pnp: Device 00:0a does not support disabling.
rtc_cmos: probe of 00:0a failed with error -16
usb 3-1: configuration #1 chosen from 1 choice
usb 3-2: new full speed USB device using uhci_hcd and address 3
usb 3-2: configuration #1 chosen from 1 choice
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 7 ports detected
usbcore: registered new interface driver hiddev
input: Avocent HP 336047-B21 as /class/input/input0
input: USB HID v1.10 Keyboard [Avocent HP 336047-B21] on usb-0000:00:02.0-3
input: Avocent HP 336047-B21 as /class/input/input1
input: USB HID v1.10 Mouse [Avocent HP 336047-B21] on usb-0000:00:02.0-3
input: HP Virtual Keyboard as /class/input/input2
input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1
input: HP Virtual Keyboard as /class/input/input3
input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
EXT3 FS on cciss/c0d0p1, internal journal
802.1Q VLAN Support v1.8 Ben Greear <greearb <at> candelatech.com>
All bugs added by David S. Miller <davem <at> redhat.com>
ipmi message handler version 39.1
ipmi device interface
IPMI System Interface driver.
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
IPMI kcs interface initialized
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: duplicate interface
ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16
ACPI: PCI Interrupt 0000:01:04.6[A] -> Link [LNKW] -> GSI 16 (level, high) -> IRQ 16
ipmi_si: Trying PCI-specified kcs state machine at mem address 0xd9df0000, slave address 0x0, irq 16
Using irq 16
ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
IPMI kcs interface initialized
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 16777208k swap on /dev/mapper/vg0-swap. Priority:-1 extents:1 across:16777208k
NET: Registered protocol family 15
Ethernet Channel Bonding Driver: v3.1.3 (June 13, 2007)
bonding: MII link monitoring set to 100 ms
bonding: bond0: Adding slave eth0.
bonding: bond0: enslaving eth0 as a backup interface with a down link.
bonding: bond0: Adding slave eth1.
bonding: bond0: enslaving eth1 as a backup interface with a down link.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
ADDRCONF(NETDEV_UP): bond0: link is not ready
Initializing XFRM netlink socket
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
bonding: bond0: link status up for interface eth0, enabling it in 10000 ms.
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
bonding: bond0: link status up for interface eth1, enabling it in 10000 ms.
bonding: bond0: link status definitely up for interface eth0.
bonding: bond0: making interface eth0 the new active one.
bonding: bond0: first active interface up!
ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
bonding: bond0: link status definitely up for interface eth1.
eth1: no IPv6 routers present
eth0: no IPv6 routers present
bond0: no IPv6 routers present
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT misc device (ioctl) driver 3.04.04
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
pnp: the driver 'parport_pc' has been registered
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
Probing EDD (edd=off to disable)... ok [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.30-1-amd64 (Debian 2.6.30-1) (waldi <at> debian.org) (gcc version 4.3.3 (Debian 4.3.3-10) ) #1 SMP Sun Jun 14 15:00:29 UTC 2009 [ 0.000000] Command line: root=/dev/cciss/c0d0p1 ro debug console=ttyS1,115200 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe4e000 (usable) [ 0.000000] BIOS-e820: 000000007fe4e000 - 000000007fe56000 (ACPI data) [ 0.000000] BIOS-e820: 000000007fe56000 - 000000007fe57000 (usable) [ 0.000000] BIOS-e820: 000000007fe57000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000047ffff000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x47ffff max_arch_pfn = 0x100000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-back [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000480000000 aka 18432M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7fe57 max_arch_pfn = 0x100000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007fe57000 [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007fe57000 page 4k [ 0.000000] kernel direct mapping tables up to 7fe57000 <at> 8000-c000 [ 0.000000] init_memory_mapping: 0000000100000000-000000047ffff000 [ 0.000000] 0100000000 - 047fe00000 page 2M [ 0.000000] 047fe00000 - 047ffff000 page 4k [ 0.000000] kernel direct mapping tables up to 47ffff000 <at> a000-1e000 [ 0.000000] RAMDISK: 3772d000 - 37fef723 [ 0.000000] ACPI: RSDP 00000000000f4f00 00024 (v02 HP ) [ 0.000000] ACPI: XSDT 000000007fe4ed00 00074 (v01 HP ProLiant 00000002 Ò 0000162E) [ 0.000000] ACPI: FACP 000000007fe4ed80 000F4 (v03 HP A07 00000002 Ò 0000162E) [ 0.000000] ACPI: DSDT 000000007fe4ee80 0498A (v01 HP DSDT 00000001 INTL 20030228) [ 0.000000] ACPI: FACS 000000007fe4e100 00040 [ 0.000000] ACPI: SPCR 000000007fe4e140 00050 (v01 HP SPCRRBSU 00000001 Ò 0000162E) [ 0.000000] ACPI: HPET 000000007fe4e1c0 00038 (v01 HP ProLiant 00000002 Ò 0000162E) [ 0.000000] ACPI: SPMI 000000007fe4e200 00040 (v05 HP ProLiant 00000001 Ò 0000162E) [ 0.000000] ACPI: ERST 000000007fe4e240 001D0 (v01 HP ProLiant 00000001 Ò 0000162E) [ 0.000000] ACPI: APIC 000000007fe4e440 000C6 (v01 HP ProLiant 00000002 00000000) [ 0.000000] ACPI: SRAT 000000007fe4e580 001A0 (v01 AMD FAM_F_10 00000002 AMD 00000001) [ 0.000000] ACPI: FFFF 000000007fe4e980 00176 (v01 HP ProLiant 00000001 Ò 0000162E) [ 0.000000] ACPI: BERT 000000007fe4eb00 00030 (v01 HP ProLiant 00000001 Ò 0000162E) [ 0.000000] ACPI: HEST 000000007fe4eb40 00170 (v01 HP ProLiant 00000001 Ò 0000162E) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 2 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 3 -> Node 1 [ 0.000000] SRAT: PXM 2 -> APIC 4 -> Node 2 [ 0.000000] SRAT: PXM 2 -> APIC 5 -> Node 2 [ 0.000000] SRAT: PXM 3 -> APIC 6 -> Node 3 [ 0.000000] SRAT: PXM 3 -> APIC 7 -> Node 3 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] SRAT: Node 0 PXM 0 100000-80000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-180000000 [ 0.000000] SRAT: Node 1 PXM 1 180000000-280000000 [ 0.000000] SRAT: Node 2 PXM 2 280000000-380000000 [ 0.000000] SRAT: Node 3 PXM 3 380000000-480000000 [ 0.000000] NUMA: Allocated memnodemap from 19000 - 22040 [ 0.000000] NUMA: Using 20 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-0000000180000000 [ 0.000000] NODE_DATA [0000000000022040 - 000000000002a03f] [ 0.000000] bootmap [000000000002b000 - 000000000005afff] pages 30 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0180000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS ==> [0000200000 - 00007d98cc] [ 0.000000] #3 [003772d000 - 0037fef723] RAMDISK ==> [003772d000 - 0037fef723] [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] [ 0.000000] #5 [00007da000 - 00007da114] BRK ==> [00007da000 - 00007da114] [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] #7 [000000a000 - 0000019000] PGTABLE ==> [000000a000 - 0000019000] [ 0.000000] #8 [0000019000 - 0000022040] MEMNODEMAP ==> [0000019000 - 0000022040] [ 0.000000] Bootmem setup node 1 0000000180000000-0000000280000000 [ 0.000000] NODE_DATA [0000000180000000 - 0000000180007fff] [ 0.000000] bootmap [0000000180008000 - 0000000180027fff] pages 20 [ 0.000000] (9 early reservations) ==> bootmem [0180000000 - 0280000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE [ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS [ 0.000000] #3 [003772d000 - 0037fef723] RAMDISK [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved [ 0.000000] #5 [00007da000 - 00007da114] BRK [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE [ 0.000000] #7 [000000a000 - 0000019000] PGTABLE [ 0.000000] #8 [0000019000 - 0000022040] MEMNODEMAP [ 0.000000] Bootmem setup node 2 0000000280000000-0000000380000000 [ 0.000000] NODE_DATA [0000000280000000 - 0000000280007fff] [ 0.000000] bootmap [0000000280008000 - 0000000280027fff] pages 20 [ 0.000000] (9 early reservations) ==> bootmem [0280000000 - 0380000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE [ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS [ 0.000000] #3 [003772d000 - 0037fef723] RAMDISK [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved [ 0.000000] #5 [00007da000 - 00007da114] BRK [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE [ 0.000000] #7 [000000a000 - 0000019000] PGTABLE [ 0.000000] #8 [0000019000 - 0000022040] MEMNODEMAP [ 0.000000] Bootmem setup node 3 0000000380000000-000000047ffff000 [ 0.000000] NODE_DATA [0000000380000000 - 0000000380007fff] [ 0.000000] bootmap [0000000380008000 - 0000000380027fff] pages 20 [ 0.000000] (9 early reservations) ==> bootmem [0380000000 - 047ffff000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE [ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS [ 0.000000] #3 [003772d000 - 0037fef723] RAMDISK [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved [ 0.000000] #5 [00007da000 - 00007da114] BRK [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE [ 0.000000] #7 [000000a000 - 0000019000] PGTABLE [ 0.000000] #8 [0000019000 - 0000022040] MEMNODEMAP [ 0.000000] found SMP MP-table at [ffff8800000f4f80] f4f80 [ 0.000000] [ffffe20000000000-ffffe200053fffff] PMD -> [ffff880028200000-ffff88002b9fffff] on node 0 [ 0.000000] [ffffe20005400000-ffffe20008bfffff] PMD -> [ffff880180200000-ffff8801839fffff] on node 1 [ 0.000000] [ffffe20008c00000-ffffe2000c3fffff] PMD -> [ffff880280200000-ffff8802839fffff] on node 2 [ 0.000000] [ffffe2000c400000-ffffe2000fbfffff] PMD -> [ffff880380200000-ffff8803839fffff] on node 3 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0047ffff [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[7] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007fe4e [ 0.000000] 0: 0x0007fe56 -> 0x0007fe57 [ 0.000000] 0: 0x00100000 -> 0x00180000 [ 0.000000] 1: 0x00180000 -> 0x00280000 [ 0.000000] 2: 0x00280000 -> 0x00380000 [ 0.000000] 3: 0x00380000 -> 0x0047ffff [ 0.000000] On node 0 totalpages: 1048046 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1622 pages reserved [ 0.000000] DMA zone: 2321 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 505479 pages, LIFO batch:31 [ 0.000000] Normal zone: 7168 pages used for memmap [ 0.000000] Normal zone: 517120 pages, LIFO batch:31 [ 0.000000] On node 1 totalpages: 1048576 [ 0.000000] Normal zone: 14336 pages used for memmap [ 0.000000] Normal zone: 1034240 pages, LIFO batch:31 [ 0.000000] On node 2 totalpages: 1048576 [ 0.000000] Normal zone: 14336 pages used for memmap [ 0.000000] Normal zone: 1034240 pages, LIFO batch:31 [ 0.000000] On node 3 totalpages: 1048575 [ 0.000000] Normal zone: 14336 pages used for memmap [ 0.000000] Normal zone: 1034239 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x908 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xd9cf0000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xd9cf0000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xd9fd0000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xd9fd0000, GSI 24-30 [ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xd9fe0000] gsi_base[31]) [ 0.000000] IOAPIC[2]: apic_id 10, version 0, address 0xd9fe0000, GSI 31-37 [ 0.000000] ACPI: IOAPIC (id[0x0b] address[0xd9ff0000] gsi_base[38]) [ 0.000000] IOAPIC[3]: apic_id 11, version 0, address 0xd9ff0000, GSI 38-61 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: NMI_SRC (dfl dfl global_irq 28) [ 0.000000] ACPI: NMI_SRC (dfl dfl global_irq 35) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 62 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000007fe4e000 - 000000007fe56000 [ 0.000000] PM: Registered nosave memory: 000000007fe57000 - 0000000080000000 [ 0.000000] PM: Registered nosave memory: 0000000080000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 [ 0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000 [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:4 [ 0.000000] PERCPU: Allocated 19 4k pages, static data 76256 bytes [ 0.000000] Built 4 zonelists in Zone order, mobility grouping on. Total pages: 4127639 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/cciss/c0d0p1 ro debug console=ttyS1,115200 [ 0.000000] Initializing CPU#0 [ 0.000000] Experimental hierarchical RCU implementation. [ 0.000000] Experimental hierarchical RCU init done. [ 0.000000] NR_IRQS:4352 nr_irqs:1118 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2813.220 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [ttyS1] enabled [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Node 0: aperture <at> 20000000 size 32 MB [ 0.004000] Aperture pointing to e820 RAM. Ignoring. [ 0.004000] Your BIOS doesn't leave a aperture memory hole [ 0.004000] Please enable the IOMMU option in the BIOS setup [ 0.004000] This costs you 64 MB of RAM [ 0.004000] Mapping aperture over 65536 KB of RAM <at> 20000000 [ 0.004000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.004000] Memory: 16463796k/18874364k available (2782k kernel code, 2099272k absent, 311296k reserved, 1398k data, 560k init) [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5626.44 BogoMIPS (lpj=11252880) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.005448] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.019021] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.025049] Mount-cache hash table entries: 256 [ 0.025428] Initializing cgroup subsys ns [ 0.025944] Initializing cgroup subsys cpuacct [ 0.026946] Initializing cgroup subsys devices [ 0.027938] Initializing cgroup subsys freezer [ 0.028004] Initializing cgroup subsys net_cls [ 0.029064] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.030050] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.031000] CPU 0/0x0 -> Node 0 [ 0.032002] tseg: 0000000000 [ 0.032994] CPU: Physical Processor ID: 0 [ 0.034006] CPU: Processor Core ID: 0 [ 0.035034] using C1E aware idle routine [ 0.036583] ACPI: Core revision 20090320 [ 0.046374] Setting APIC routing to flat [ 0.048421] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.092558] CPU0: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 [ 0.104001] Booting processor 1 APIC 0x2 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5625.98 BogoMIPS (lpj=11251976) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.004000] CPU 1/0x2 -> Node 1 [ 0.004000] CPU: Physical Processor ID: 1 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.196646] CPU1: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 [ 0.204110] Booting processor 2 APIC 0x4 ip 0x6000 [ 0.004000] Initializing CPU#2 [ 0.004000] Calibrating delay using timer specific routine.. 5626.00 BogoMIPS (lpj=11252017) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.004000] CPU 2/0x4 -> Node 2 [ 0.004000] CPU: Physical Processor ID: 2 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.300611] CPU2: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 [ 0.316183] Booting processor 3 APIC 0x6 ip 0x6000 [ 0.004000] Initializing CPU#3 [ 0.004000] Calibrating delay using timer specific routine.. 5625.99 BogoMIPS (lpj=11251993) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.004000] CPU 3/0x6 -> Node 3 [ 0.004000] CPU: Physical Processor ID: 3 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.408736] CPU3: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 [ 0.416687] Booting processor 4 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#4 [ 0.004000] Calibrating delay using timer specific routine.. 5625.96 BogoMIPS (lpj=11251933) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.004000] CPU 4/0x1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106 [ 0.512533] CPU4: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 [ 0.528175] Booting processor 5 APIC 0x3 ip 0x6000 [ 0.004000] Initializing CPU#5 [ 0.004000] Calibrating delay using timer specific routine.. 5626.00 BogoMIPS (lpj=11252000) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.004000] CPU 5/0x3 -> Node 1 [ 0.004000] CPU: Physical Processor ID: 1 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106 [ 0.620606] CPU5: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 [ 0.628739] Booting processor 6 APIC 0x5 ip 0x6000 [ 0.004000] Initializing CPU#6 [ 0.004000] Calibrating delay using timer specific routine.. 5626.01 BogoMIPS (lpj=11252033) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.004000] CPU 6/0x5 -> Node 2 [ 0.004000] CPU: Physical Processor ID: 2 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106 [ 0.724628] CPU6: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 [ 0.736213] Booting processor 7 APIC 0x7 ip 0x6000 [ 0.004000] Initializing CPU#7 [ 0.004000] Calibrating delay using timer specific routine.. 5625.96 BogoMIPS (lpj=11251925) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.004000] CPU 7/0x7 -> Node 3 [ 0.004000] CPU: Physical Processor ID: 3 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106 [ 0.832703] CPU7: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03 [ 0.840009] Brought up 8 CPUs [ 0.841323] Total of 8 processors activated (45008.37 BogoMIPS). [ 0.844152] CPU0 attaching sched-domain: [ 0.848005] domain 0: span 0,4 level CPU [ 0.849811] groups: 0 4 [ 0.854015] domain 1: span 0-7 level NODE [ 0.856840] groups: 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) [ 0.876005] CPU1 attaching sched-domain: [ 0.880008] domain 0: span 1,5 level CPU [ 0.888003] groups: 1 5 [ 0.889280] domain 1: span 0-7 level NODE [ 0.891170] groups: 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) [ 0.904902] CPU2 attaching sched-domain: [ 0.908005] domain 0: span 2,6 level CPU [ 0.912003] groups: 2 6 [ 0.920004] domain 1: span 0-7 level NODE [ 0.924837] groups: 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) [ 0.952004] CPU3 attaching sched-domain: [ 0.956004] domain 0: span 3,7 level CPU [ 0.962700] groups: 3 7 [ 0.964255] domain 1: span 0-7 level NODE [ 0.968003] groups: 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) [ 0.982117] CPU4 attaching sched-domain: [ 0.984004] domain 0: span 0,4 level CPU [ 0.992003] groups: 4 0 [ 1.000004] domain 1: span 0-7 level NODE [ 1.004835] groups: 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) [ 1.015035] CPU5 attaching sched-domain: [ 1.016004] domain 0: span 1,5 level CPU [ 1.024003] groups: 5 1 [ 1.032004] domain 1: span 0-7 level NODE [ 1.036842] groups: 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) [ 1.060108] CPU6 attaching sched-domain: [ 1.062024] domain 0: span 2,6 level CPU [ 1.064773] groups: 6 2 [ 1.066034] domain 1: span 0-7 level NODE [ 1.067910] groups: 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) [ 1.077805] CPU7 attaching sched-domain: [ 1.080004] domain 0: span 3,7 level CPU [ 1.082771] groups: 7 3 [ 1.088004] domain 1: span 0-7 level NODE [ 1.092839] groups: 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) [ 1.109100] net_namespace: 1936 bytes [ 1.112064] Booting paravirtualized kernel on bare hardware [ 1.116123] regulator: core version 0.5 [ 1.120164] NET: Registered protocol family 16 [ 1.124041] node 0 link 1: io port [1000, 2fff] [ 1.128005] node 1 link 2: io port [3000, ffff] [ 1.132004] TOM: 0000000080000000 aka 2048M [ 1.136004] node 0 link 1: mmio [d0000000, d9efffff] [ 1.140079] node 1 link 2: mmio [d9f00000, dfefffff] [ 1.145009] node 0 link 1: mmio [e0000000, e3ffffff] [ 1.148105] node 1 link 2: mmio [e4000000, e7ffffff] [ 1.152109] node 0 link 1: mmio [a0000, bffff] [ 1.155937] TOM2: 0000000480000000 aka 18432M [ 1.156005] bus: [00,3f] on node 0 link 1 [ 1.160004] bus: 00 index 0 io port: [0, 2fff] [ 1.164004] bus: 00 index 1 mmio: [80000000, d9efffff] [ 1.168004] bus: 00 index 2 mmio: [dff00000, e3ffffff] [ 1.172004] bus: 00 index 3 mmio: [a0000, bffff] [ 1.176004] bus: 00 index 4 mmio: [e8000000, ffffffff] [ 1.180004] bus: 00 index 5 mmio: [480000000, fcffffffff] [ 1.184004] bus: [40,7f] on node 1 link 2 [ 1.188004] bus: 40 index 0 io port: [3000, ffff] [ 1.192004] bus: 40 index 1 mmio: [d9f00000, dfefffff] [ 1.196004] bus: 40 index 2 mmio: [e4000000, e7ffffff] [ 1.200013] ACPI: bus type pci registered [ 1.204039] PCI: Using configuration type 1 for base access [ 1.208010] PCI: HP ProLiant DL585 G2 detected, enabling pci=bfsort. [ 1.212268] bio: create slab <bio-0> at 0 [ 1.216390] ACPI: EC: Look up EC in DSDT [ 1.227390] ACPI: SSDT 000000007fe58000 00AC4 (v02 HP PNOWSSDT 00000002 HP 00000001) [ 1.232517] ACPI: Interpreter enabled [ 1.236005] ACPI: (supports S0 S4 S5) [ 1.240379] ACPI: Using IOAPIC for interrupt routing [ 1.248824] ACPI: No dock devices found. [ 1.252018] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.256091] pci 0000:00:02.0: reg 10 32bit mmio: [0xd9ce0000-0xd9ce0fff] [ 1.260016] pci 0000:00:02.0: supports D1 D2 [ 1.264004] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.268005] pci 0000:00:02.0: PME# disabled [ 1.269905] pci 0000:00:02.1: reg 10 32bit mmio: [0xd9cd0000-0xd9cd00ff] [ 1.272018] pci 0000:00:02.1: supports D1 D2 [ 1.276006] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 1.280005] pci 0000:00:02.1: PME# disabled [ 1.284027] pci 0000:00:06.0: reg 20 io port: [0x500-0x50f] [ 1.288042] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.292010] pci 0000:00:0c.0: PME# disabled [ 1.296025] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.300004] pci 0000:00:0d.0: PME# disabled [ 1.304023] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.308005] pci 0000:00:0e.0: PME# disabled [ 1.312245] pci 0000:01:03.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] [ 1.316007] pci 0000:01:03.0: reg 14 io port: [0x1000-0x10ff] [ 1.320007] pci 0000:01:03.0: reg 18 32bit mmio: [0xd9ef0000-0xd9efffff] [ 1.324016] pci 0000:01:03.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 1.328017] pci 0000:01:03.0: supports D1 D2 [ 1.332026] pci 0000:01:04.0: reg 10 io port: [0x2800-0x28ff] [ 1.336007] pci 0000:01:04.0: reg 14 32bit mmio: [0xd9ee0000-0xd9ee01ff] [ 1.340027] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold [ 1.344005] pci 0000:01:04.0: PME# disabled [ 1.348031] pci 0000:01:04.2: reg 10 io port: [0x1400-0x14ff] [ 1.352008] pci 0000:01:04.2: reg 14 32bit mmio: [0xd9ed0000-0xd9ed07ff] [ 1.356008] pci 0000:01:04.2: reg 18 32bit mmio: [0xd9ec0000-0xd9ec3fff] [ 1.360008] pci 0000:01:04.2: reg 1c 32bit mmio: [0xd9e00000-0xd9e7ffff] [ 1.364014] pci 0000:01:04.2: reg 30 32bit mmio: [0x000000-0x00ffff] [ 1.368016] pci 0000:01:04.2: PME# supported from D0 D3hot D3cold [ 1.372006] pci 0000:01:04.2: PME# disabled [ 1.376041] pci 0000:01:04.4: reg 20 io port: [0x1800-0x181f] [ 1.380023] pci 0000:01:04.4: PME# supported from D0 D3hot D3cold [ 1.384006] pci 0000:01:04.4: PME# disabled [ 1.388026] pci 0000:01:04.6: reg 10 32bit mmio: [0xd9df0000-0xd9df00ff] [ 1.392032] pci 0000:01:04.6: PME# supported from D0 D3hot D3cold [ 1.396006] pci 0000:01:04.6: PME# disabled [ 1.400029] pci 0000:00:09.0: transparent bridge [ 1.404005] pci 0000:00:09.0: bridge io port: [0x1000-0x2fff] [ 1.408005] pci 0000:00:09.0: bridge 32bit mmio: [0xd9d00000-0xd9efffff] [ 1.412005] pci 0000:00:09.0: bridge 32bit mmio pref: [0xd0000000-0xd7ffffff] [ 1.416106] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.420084] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] [ 1.424111] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT] [ 1.428106] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1._PRT] [ 1.432103] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2._PRT] [ 1.440145] ACPI: PCI Root Bridge [PCI1] (0000:40) [ 1.444130] pci 0000:40:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.448006] pci 0000:40:0b.0: PME# disabled [ 1.452035] pci 0000:40:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.456005] pci 0000:40:0c.0: PME# disabled [ 1.460034] pci 0000:40:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.464006] pci 0000:40:0d.0: PME# disabled [ 1.465912] pci 0000:40:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.468005] pci 0000:40:0e.0: PME# disabled [ 1.470000] pci 0000:40:10.0: Enabling HT MSI Mapping [ 1.472067] pci 0000:40:11.0: Enabling HT MSI Mapping [ 1.476209] pci 0000:41:01.0: reg 10 64bit mmio: [0xdc000000-0xddffffff] [ 1.480016] pci 0000:41:01.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 1.484016] pci 0000:41:01.0: PME# supported from D3hot D3cold [ 1.488005] pci 0000:41:01.0: PME# disabled [ 1.489914] pci 0000:41:02.0: reg 10 64bit mmio: [0xda000000-0xdbffffff] [ 1.492015] pci 0000:41:02.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 1.496016] pci 0000:41:02.0: PME# supported from D3hot D3cold [ 1.500005] pci 0000:41:02.0: PME# disabled [ 1.504027] pci 0000:40:10.0: bridge 32bit mmio: [0xda000000-0xddffffff] [ 1.508035] pci 0000:42:02.0: reg 10 64bit mmio: [0xdfef0000-0xdfef1fff] [ 1.512007] pci 0000:42:02.0: reg 18 io port: [0x3000-0x30ff] [ 1.516009] pci 0000:42:02.0: reg 1c 64bit mmio: [0xdfe80000-0xdfebffff] [ 1.520009] pci 0000:42:02.0: reg 30 32bit mmio: [0x000000-0x03ffff] [ 1.524015] pci 0000:42:02.0: supports D1 [ 1.528027] pci 0000:40:11.0: bridge io port: [0x3000-0x3fff] [ 1.532006] pci 0000:40:11.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff] [ 1.536022] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGA._PRT] [ 1.540070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGB._PRT] [ 1.544161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT] [ 1.548116] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT] [ 1.552112] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2._PRT] [ 1.556111] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE3._PRT] [ 1.560238] ACPI: PCI Interrupt Link [LNKW] (IRQs 16) *0, disabled. [ 1.566832] ACPI: PCI Interrupt Link [LNKX] (IRQs 17) *0, disabled. [ 1.570622] ACPI: PCI Interrupt Link [LNKY] (IRQs 18) *0, disabled. [ 1.575267] ACPI: PCI Interrupt Link [LNKZ] (IRQs 19) *0, disabled. [ 1.578851] ACPI: PCI Interrupt Link [LNU0] (IRQs 22) *5 [ 1.582271] ACPI: PCI Interrupt Link [LNU2] (IRQs 23) *11 [ 1.584571] ACPI: PCI Interrupt Link [LNKA] (IRQs 54) *0, disabled. [ 1.592869] ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled. [ 1.600881] ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled. [ 1.608885] ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled. [ 1.616736] usbcore: registered new interface driver usbfs [ 1.620026] usbcore: registered new interface driver hub [ 1.624022] usbcore: registered new device driver usb [ 1.628024] PCI: Using ACPI for IRQ routing [ 1.632125] Expanded resource reserved due to conflict with PCI Bus #00 [ 1.636005] Expanded resource reserved due to conflict with PCI Bus #00 [ 1.652117] PCI-DMA: Disabling AGP. [ 1.656125] PCI-DMA: aperture base <at> 20000000 size 65536 KB [ 1.660006] PCI-DMA: using GART IOMMU. [ 1.664007] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.668708] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 1.678342] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 1.700014] Switched to high resolution mode on CPU 0 [ 1.700509] Switched to high resolution mode on CPU 4 [ 1.700590] Switched to high resolution mode on CPU 2 [ 1.700595] Switched to high resolution mode on CPU 6 [ 1.700614] Switched to high resolution mode on CPU 1 [ 1.700622] Switched to high resolution mode on CPU 5 [ 1.700728] Switched to high resolution mode on CPU 3 [ 1.700734] Switched to high resolution mode on CPU 7 [ 1.940009] pnp: PnP ACPI init [ 1.957524] ACPI: bus type pnp registered [ 1.967669] pnp: PnP ACPI: found 16 devices [ 1.990145] ACPI: ACPI bus type pnp unregistered [ 2.017455] system 00:01: ioport range 0x408-0x40f has been reserved [ 2.046150] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 2.083139] system 00:01: ioport range 0x700-0x73f has been reserved [ 2.086009] system 00:01: ioport range 0x800-0x8fe has been reserved [ 2.110157] system 00:01: ioport range 0x900-0x9fe has been reserved [ 2.124136] system 00:01: ioport range 0x9ff-0x9ff has been reserved [ 2.149160] system 00:01: ioport range 0xa00-0xafe has been reserved [ 2.186185] system 00:01: ioport range 0xaff-0xaff has been reserved [ 2.212150] system 00:01: ioport range 0xb00-0xbfe has been reserved [ 2.249156] system 00:01: ioport range 0xbff-0xbff has been reserved [ 2.275152] system 00:01: ioport range 0xc80-0xc83 has been reserved [ 2.311161] system 00:01: ioport range 0xcd4-0xcd7 has been reserved [ 2.347167] system 00:01: ioport range 0xcf9-0xcf9 could not be reserved [ 2.375057] system 00:01: ioport range 0xf50-0xf58 has been reserved [ 2.411166] system 00:01: ioport range 0xca0-0xca1 has been reserved [ 2.425452] system 00:01: ioport range 0xca4-0xca5 has been reserved [ 2.443744] system 00:01: ioport range 0xc00-0xc03 has been reserved [ 2.464192] system 00:01: ioport range 0x2f8-0x2ff has been reserved [ 2.506582] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01 [ 2.539152] pci 0000:00:09.0: IO window: 0x1000-0x2fff [ 2.570472] pci 0000:00:09.0: MEM window: 0xd9d00000-0xd9efffff [ 2.574146] pci 0000:00:09.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff [ 2.618165] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:08 [ 2.641147] pci 0000:00:0c.0: IO window: disabled [ 2.669373] pci 0000:00:0c.0: MEM window: disabled [ 2.698239] pci 0000:00:0c.0: PREFETCH window: disabled [ 2.700685] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:05 [ 2.729181] pci 0000:00:0d.0: IO window: disabled [ 2.757167] pci 0000:00:0d.0: MEM window: disabled [ 2.786181] pci 0000:00:0d.0: PREFETCH window: disabled [ 2.788628] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02 [ 2.791277] pci 0000:00:0e.0: IO window: disabled [ 2.809490] pci 0000:00:0e.0: MEM window: disabled [ 2.838163] pci 0000:00:0e.0: PREFETCH window: disabled [ 2.840610] pci 0000:00:09.0: setting latency timer to 64 [ 2.843016] pci 0000:00:0c.0: setting latency timer to 64 [ 2.873151] pci 0000:00:0d.0: setting latency timer to 64 [ 2.881135] pci 0000:00:0e.0: setting latency timer to 64 [ 2.912200] pci 0000:40:0b.0: PCI bridge, secondary bus 0000:4f [ 2.946172] pci 0000:40:0b.0: IO window: disabled [ 2.963206] pci 0000:40:0b.0: MEM window: disabled [ 2.981201] pci 0000:40:0b.0: PREFETCH window: disabled [ 2.983638] pci 0000:40:0c.0: PCI bridge, secondary bus 0000:4c [ 3.012182] pci 0000:40:0c.0: IO window: disabled [ 3.039516] pci 0000:40:0c.0: MEM window: disabled [ 3.047943] pci 0000:40:0c.0: PREFETCH window: disabled [ 3.077157] pci 0000:40:0d.0: PCI bridge, secondary bus 0000:49 [ 3.079815] pci 0000:40:0d.0: IO window: disabled [ 3.104195] pci 0000:40:0d.0: MEM window: disabled [ 3.130465] pci 0000:40:0d.0: PREFETCH window: disabled [ 3.153179] pci 0000:40:0e.0: PCI bridge, secondary bus 0000:46 [ 3.187165] pci 0000:40:0e.0: IO window: disabled [ 3.215256] pci 0000:40:0e.0: MEM window: disabled [ 3.244170] pci 0000:40:0e.0: PREFETCH window: disabled [ 3.274221] pci 0000:40:10.0: PCI bridge, secondary bus 0000:41 [ 3.308178] pci 0000:40:10.0: IO window: disabled [ 3.336189] pci 0000:40:10.0: MEM window: 0xda000000-0xddffffff [ 3.371211] pci 0000:40:10.0: PREFETCH window: 0x000000d9f00000-0x000000d9ffffff [ 3.415171] pci 0000:40:11.0: PCI bridge, secondary bus 0000:42 [ 3.418746] pci 0000:40:11.0: IO window: 0x3000-0x3fff [ 3.421189] pci 0000:40:11.0: MEM window: 0xdfe00000-0xdfefffff [ 3.445169] pci 0000:40:11.0: PREFETCH window: 0x000000de000000-0x000000de0fffff [ 3.468981] pci 0000:40:0b.0: setting latency timer to 64 [ 3.498222] pci 0000:40:0c.0: setting latency timer to 64 [ 3.500669] pci 0000:40:0d.0: setting latency timer to 64 [ 3.526170] pci 0000:40:0e.0: setting latency timer to 64 [ 3.546183] pci_bus 0000:00: resource 0 io: [0x00-0x2fff] [ 3.566494] pci_bus 0000:00: resource 1 mem: [0x80000000-0xd9efffff] [ 3.603196] pci_bus 0000:00: resource 2 mem: [0xdff00000-0xe3ffffff] [ 3.628197] pci_bus 0000:00: resource 3 mem: [0x0a0000-0x0bffff] [ 3.651265] pci_bus 0000:00: resource 4 mem: [0xe8000000-0xffffffff] [ 3.670843] pci_bus 0000:00: resource 5 mem: [0x480000000-0xfcffffffff] [ 3.673813] pci_bus 0000:01: resource 0 io: [0x1000-0x2fff] [ 3.676354] pci_bus 0000:01: resource 1 mem: [0xd9d00000-0xd9efffff] [ 3.703416] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff] [ 3.742370] pci_bus 0000:01: resource 3 io: [0x00-0x2fff] [ 3.753214] pci_bus 0000:01: resource 4 mem: [0x80000000-0xd9efffff] [ 3.779205] pci_bus 0000:01: resource 5 mem: [0xdff00000-0xe3ffffff] [ 3.815204] pci_bus 0000:01: resource 6 mem: [0x0a0000-0x0bffff] [ 3.827199] pci_bus 0000:01: resource 7 mem: [0xe8000000-0xffffffff] [ 3.853497] pci_bus 0000:01: resource 8 mem: [0x480000000-0xfcffffffff] [ 3.884189] pci_bus 0000:40: resource 0 io: [0x3000-0xffff] [ 3.905203] pci_bus 0000:40: resource 1 mem: [0xd9f00000-0xdfefffff] [ 3.913677] pci_bus 0000:40: resource 2 mem: [0xe4000000-0xe7ffffff] [ 3.934225] pci_bus 0000:41: resource 1 mem: [0xda000000-0xddffffff] [ 3.971546] pci_bus 0000:41: resource 2 pref mem [0xd9f00000-0xd9ffffff] [ 3.974579] pci_bus 0000:42: resource 0 io: [0x3000-0x3fff] [ 4.000243] pci_bus 0000:42: resource 1 mem: [0xdfe00000-0xdfefffff] [ 4.037538] pci_bus 0000:42: resource 2 pref mem [0xde000000-0xde0fffff] [ 4.040775] NET: Registered protocol family 2 [ 4.116540] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 4.162713] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 4.200152] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 4.239278] TCP: Hash tables configured (established 524288 bind 65536) [ 4.276228] TCP reno registered [ 4.312283] NET: Registered protocol family 1 [ 4.336325] Trying to unpack rootfs image as initramfs... [ 4.624886] Freeing initrd memory: 8969k freed [ 4.657805] audit: initializing netlink socket (disabled) [ 4.687272] type=2000 audit(1246278158.687:1): initialized [ 4.720954] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 4.756685] VFS: Disk quotas dquot_6.5.2 [ 4.778321] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 4.814913] msgmni has been set to 32173 [ 4.837641] alg: No test for stdrng (krng) [ 4.860377] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 4.892210] io scheduler noop registered [ 4.893971] io scheduler anticipatory registered [ 4.896038] io scheduler deadline registered [ 4.919312] io scheduler cfq registered (default) [ 4.976024] pci 0000:00:0c.0: Found enabled HT MSI Mapping [ 5.007663] pci 0000:00:0d.0: Found enabled HT MSI Mapping [ 5.021253] pci 0000:00:0e.0: Found enabled HT MSI Mapping [ 5.027515] pci 0000:01:03.0: Boot video device [ 5.052257] pci 0000:01:04.4: HCRESET not completed yet! [ 5.083283] pci 0000:40:0b.0: Found enabled HT MSI Mapping [ 5.114281] pci 0000:40:0c.0: Found enabled HT MSI Mapping [ 5.145240] pci 0000:40:0d.0: Found enabled HT MSI Mapping [ 5.165247] pci 0000:40:0e.0: Found enabled HT MSI Mapping [ 5.197482] alloc irq_desc for 62 on cpu 0 node 0 [ 5.201454] alloc kstat_irqs on cpu 0 node 0 [ 5.228248] pcieport-driver 0000:00:0c.0: irq 62 for MSI/MSI-X [ 5.251251] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 5.287406] alloc irq_desc for 63 on cpu 0 node 0 [ 5.291383] alloc kstat_irqs on cpu 0 node 0 [ 5.341232] pcieport-driver 0000:00:0d.0: irq 63 for MSI/MSI-X [ 5.352289] pcieport-driver 0000:00:0d.0: setting latency timer to 64 [ 5.367374] alloc irq_desc for 64 on cpu 0 node 0 [ 5.371351] alloc kstat_irqs on cpu 0 node 0 [ 5.420258] pcieport-driver 0000:00:0e.0: irq 64 for MSI/MSI-X [ 5.443244] pcieport-driver 0000:00:0e.0: setting latency timer to 64 [ 5.469462] alloc irq_desc for 65 on cpu 0 node 0 [ 5.473414] alloc kstat_irqs on cpu 0 node 0 [ 5.523272] pcieport-driver 0000:40:0b.0: irq 65 for MSI/MSI-X [ 5.546260] pcieport-driver 0000:40:0b.0: setting latency timer to 64 [ 5.580680] alloc irq_desc for 66 on cpu 0 node 0 [ 5.584652] alloc kstat_irqs on cpu 0 node 0 [ 5.633290] pcieport-driver 0000:40:0c.0: irq 66 for MSI/MSI-X [ 5.635925] pcieport-driver 0000:40:0c.0: setting latency timer to 64 [ 5.669437] alloc irq_desc for 67 on cpu 0 node 0 [ 5.673408] alloc kstat_irqs on cpu 0 node 0 [ 5.723247] pcieport-driver 0000:40:0d.0: irq 67 for MSI/MSI-X [ 5.745270] pcieport-driver 0000:40:0d.0: setting latency timer to 64 [ 5.782390] alloc irq_desc for 68 on cpu 0 node 0 [ 5.786362] alloc kstat_irqs on cpu 0 node 0 [ 5.836269] pcieport-driver 0000:40:0e.0: irq 68 for MSI/MSI-X [ 5.859301] pcieport-driver 0000:40:0e.0: setting latency timer to 64 [ 5.891293] Linux agpgart interface v0.103 [ 5.914267] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 5.927833] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 5.962398] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 5.996727] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 6.029795] brd: module loaded [ 6.046372] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 6.090544] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 6.133907] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 6.161286] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 6.189546] mice: PS/2 mouse device common for all mice [ 6.219412] rtc_cmos 00:0a: RTC can wake from S4 [ 6.246395] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0 [ 6.280302] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 6.319331] cpuidle: using governor ladder [ 6.342304] cpuidle: using governor menu [ 6.344081] No iBFT detected. [ 6.359679] TCP cubic registered [ 6.378510] NET: Registered protocol family 10 [ 6.403987] lo: Disabled Privacy Extensions [ 6.415737] Mobile IPv6 [ 6.429491] NET: Registered protocol family 17 [ 6.455522] registered taskstats version 1 [ 6.478963] rtc_cmos 00:0a: setting system clock to 2009-06-29 12:22:45 UTC (1246278165) [ 6.524723] Freeing unused kernel memory: 560k freed [ 6.552719] Write protecting the kernel read-only data: 3792k Loading, please wait... [ 6.714798] Uniform Multi-Platform E-IDE driver [ 6.716253] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.718659] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 6.807693] ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23 [ 6.839316] alloc irq_desc for 23 on cpu 0 node 0 [ 6.843279] alloc kstat_irqs on cpu 0 node 0 [ 6.893319] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LNU2] -> GSI 23 (level, high) -> IRQ 23 [ 6.897178] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 6.913406] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.1 (May 6, 2009) [ 6.913439] alloc irq_desc for 31 on cpu 0 node 0 [ 6.913442] alloc kstat_irqs on cpu 0 node 0 [ 6.913458] bnx2 0000:41:01.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 [ 7.060694] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 7.063192] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 7.063307] SCSI subsystem initialized [ 7.107049] ehci_hcd 0000:00:02.1: debug port 1 [ 7.131294] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 7.170326] ehci_hcd 0000:00:02.1: irq 23, io mem 0xd9cd0000 [ 7.205670] HP CISS Driver (v 3.6.20) [ 7.216011] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 7.216038] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.216040] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.216042] usb usb1: Product: EHCI Host Controller [ 7.216043] usb usb1: Manufacturer: Linux 2.6.30-1-amd64 ehci_hcd [ 7.216045] usb usb1: SerialNumber: 0000:00:02.1 [ 7.216115] usb usb1: configuration #1 chosen from 1 choice [ 7.216143] hub 1-0:1.0: USB hub found [ 7.216152] hub 1-0:1.0: 10 ports detected [ 7.416946] ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22 [ 7.417379] alloc irq_desc for 26 on cpu 0 node 0 [ 7.417383] alloc kstat_irqs on cpu 0 node 0 [ 7.417397] cciss 0000:42:02.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26 [ 7.532512] alloc irq_desc for 22 on cpu 0 node 0 [ 7.534343] uhci_hcd: USB Universal Host Controller Interface driver [ 7.584509] alloc kstat_irqs on cpu 0 node 0 [ 7.612264] IRQ 26/cciss0: IRQF_DISABLED is not guaranteed on shared IRQs [ 7.612288] cciss0: <0x3220> at PCI 0000:42:02.0 IRQ 26 using DAC [ 7.645263] usb 1-6: new high speed USB device using ehci_hcd and address 3 [ 7.716471] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNU0] -> GSI 22 (level, high) -> IRQ 22 [ 7.765763] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 7.774088] usb 1-6: New USB device found, idVendor=04b4, idProduct=6560 [ 7.774091] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7.774188] usb 1-6: configuration #1 chosen from 1 choice [ 7.774358] hub 1-6:1.0: USB hub found [ 7.774454] hub 1-6:1.0: 4 ports detected [ 7.899333] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 7.929391] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 7.932286] bnx2 0000:41:01.0: firmware: requesting bnx2/bnx2-mips-06-4.6.16.fw [ 7.937068] bnx2 0000:41:01.0: firmware: requesting bnx2/bnx2-rv2p-06-4.6.16.fw [ 7.941190] eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem dc000000, IRQ 31, node addr 00:1c:c4:f0:94:fa [ 7.941290] alloc irq_desc for 32 on cpu 0 node 0 [ 7.941292] alloc kstat_irqs on cpu 0 node 0 [ 7.941302] bnx2 0000:41:02.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 [ 8.154356] ohci_hcd 0000:00:02.0: irq 22, io mem 0xd9ce0000 [ 8.164594] ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17 [ 8.196362] alloc irq_desc for 17 on cpu 0 node 0 [ 8.200350] alloc kstat_irqs on cpu 0 node 0 [ 8.250368] uhci_hcd 0000:01:04.4: PCI INT B -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17 [ 8.276389] uhci_hcd 0000:01:04.4: UHCI Host Controller [ 8.306431] uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 3 [ 8.349350] uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports [ 8.356320] uhci_hcd 0000:01:04.4: HCRESET not completed yet! [ 8.388361] uhci_hcd 0000:01:04.4: irq 17, io base 0x00001800 [ 8.421398] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.460435] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.502322] usb usb3: Product: UHCI Host Controller [ 8.508363] usb usb3: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd [ 8.543335] usb usb3: SerialNumber: 0000:01:04.4 [ 8.570386] usb usb3: configuration #1 chosen from 1 choice [ 8.601398] hub 3-0:1.0: USB hub found [ 8.603183] hub 3-0:1.0: 2 ports detected [ 8.607130] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.625375] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.636264] bnx2 0000:41:02.0: firmware: requesting bnx2/bnx2-mips-06-4.6.16.fw [ 8.641072] bnx2 0000:41:02.0: firmware: requesting bnx2/bnx2-rv2p-06-4.6.16.fw [ 8.645176] eth1: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem da000000, IRQ 32, node addr 00:1c:c4:f0:94:fc [ 8.805389] usb usb2: Product: OHCI Host Controller [ 8.812333] usb usb2: Manufacturer: Linux 2.6.30-1-amd64 ohci_hcd [ 8.847786] usb usb2: SerialNumber: 0000:00:02.0 [ 8.874426] usb usb2: configuration #1 chosen from 1 choice [ 8.877051] hub 2-0:1.0: USB hub found [ 8.886360] hub 2-0:1.0: 10 ports detected [ 8.910980] amd74xx 0000:00:06.0: UDMA133 controller [ 8.938379] amd74xx 0000:00:06.0: IDE controller (0x10de:0x0053 rev 0xa3) [ 8.960110] amd74xx 0000:00:06.0: IDE port disabled [ 8.985450] amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later [ 9.026428] ide0: BM-DMA at 0x0500-0x0507 [ 9.051405] Probing IDE interface ide0... [ 9.192017] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 9.375201] usb 3-1: New USB device found, idVendor=03f0, idProduct=1027 [ 9.413398] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.422346] usb 3-1: Product: Virtual Keyboard [ 9.437788] usb 3-1: Manufacturer: HP [ 9.442454] usb 3-1: configuration #1 chosen from 1 choice [ 9.486596] usbcore: registered new interface driver hiddev [ 9.521509] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:09.0/0000:01:04.4/usb3/3-1/3-1:1.0/input/input1 [ 9.561484] generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0 [ 9.591571] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:09.0/0000:01:04.4/usb3/3-1/3-1:1.1/input/input2 [ 9.621540] generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1 [ 9.648886] usbcore: registered new interface driver usbhid [ 9.680681] usbhid: v2.6:USB HID core driver [ 9.796016] usb 3-2: new full speed USB device using uhci_hcd and address 3 [ 9.812130] hda: HL-DT-ST DVDRAM GSA-T20L, ATAPI CD/DVD-ROM drive [ 10.007035] usb 3-2: New USB device found, idVendor=03f0, idProduct=1327 [ 10.044421] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.066465] usb 3-2: Product: Virtual Hub [ 10.068375] usb 3-2: Manufacturer: HP [ 10.070200] usb 3-2: configuration #1 chosen from 1 choice [ 10.105448] hub 3-2:1.0: USB hub found [ 10.128174] hub 3-2:1.0: 7 ports detected [ 10.148060] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 10.148839] hda: UDMA/33 mode selected [ 10.149279] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 10.163218] libata version 3.00 loaded. [ 10.170479] ide-cd driver 5.00 [ 10.172036] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache [ 10.172041] Uniform CD-ROM driver Revision: 3.20 [ 10.464011] usb 2-3: new low speed USB device using ohci_hcd and address 2 [ 10.720152] usb 2-3: New USB device found, idVendor=0624, idProduct=0341 [ 10.747414] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.774710] usb 2-3: Product: HP 336047-B21 [ 10.791406] usb 2-3: Manufacturer: Avocent [ 10.793456] usb 2-3: configuration #1 chosen from 1 choice [ 10.842417] input: Avocent HP 336047-B21 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input3 [ 10.882848] generic-usb 0003:0624:0341.0003: input,hidraw2: USB HID v1.10 Keyboard [Avocent HP 336047-B21] on usb-0000:00:02.0-3/input0 [ 10.948470] input: Avocent HP 336047-B21 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input4 [ 11.003649] generic-usb 0003:0624:0341.0004: input,hidraw3: USB HID v1.10 Mouse [Avocent HP 336047-B21] on usb-0000:00:02.0-3/input1 [ 20.501306] uhci_hcd 0000:01:04.4: HCRESET not completed yet! [ 20.533029] Restarting system. [ 20.550720] machine restart
RSS Feed