headers
Sinbad | 2 Feb 2011 13:04
Picon

Re: vlan interface egress port

hi,

suppose my config is as below.

 # brctl addbr mybridge
 # brctl addif mybridge eth0
 # brctl addif mybridge eth1
 # ifconfig mybridge up
 # ifconfig mybridge 192.168.100.5 netmask 255.255.255.0

now if the an l3 packet has to egress from mybridge
which port will be chosen ?

thanks


On Wed, Feb 2, 2011 at 1:53 PM, Nicolas de Pesloüan <nicolas.2p.debian <at> free.fr> wrote:
Le 02/02/2011 09:02, Sinbad a écrit :

hi,

suppose a vlan has 3 member ports and vlan is configured as an l3 interface
and if data is suppose to go out using that vlan interface, which
physical port
will be chosen among the 3 member ports ?

Can you describe your configuration a little bit more (possibly using the commands used to setup that configuration)?

       Nicolas.

_______________________________________________
Bridge mailing list
Bridge <at> lists.linux-foundation.org
https://lists.linux-foundation.org/mailman/listinfo/bridge
Permalink | Reply |

Gmane