Mike Gabriel | 20 Jul 00:02 2013
Picon

Bug#47: X2Go issue (in src:x2gothinclient) has been marked as closed

close #47
thanks

Hello,

we are very hopeful that X2Go issue #47 reported by you
has been resolved in the new release (1.1.0.0) of the
X2Go source project »src:x2gothinclient«.

You can view the complete changelog entry of src:x2gothinclient (1.1.0.0)
below, and you can use the following link to view all the code changes
between this and the last release of src:x2gothinclient.

       
http://code.x2go.org/gitweb?p=x2gothinclient.git;a=commitdiff;h=82d0f1a2a4c45b40e76ce98d2b8ad8b28e7aad56;hp=111c8e9da59660fb68473111fb0a32c7106a1170

If you feel that the issue has not been resolved satisfyingly, feel
free to reopen this bug report or submit a follow-up report with
further observations described based on the new released version
of src:x2gothinclient.

Thanks a lot for contributing to X2Go!!!

light+love
X2Go Git Admin (on behalf of the sender of this mail)

---
X2Go Component: src:x2gothinclient
Version: 1.1.0.0
Status: RELEASE
Date: Fri, 19 Jul 2013 23:31:10 +0200
Fixes: 47 48 66 95 115 251
Changes:
  x2gothinclient (1.1.0.0) RELEASED; urgency=low
  .
    [ Mike Gabriel ]
    * New upstream version (1.1.0.0):
      - When X2Go TCE has plymouth installed, make sure pressing the
        halt button does not change to the wrong tty.
      - Truncate echo output lines to less than 80 chars.
      - Use sed to patch initramfs configuration (rather than a patch
        that fails on wheezy). The change is needed for squeeze only.
      - Fix x2go_tce_shell.sh script, escape braces.
      - Change method of mounting /proc, /sys and /dev inside of chroots.
      - Step towards wheezy, enable plymouth boot splash.
      - Symlink /etc/mtab to /proc/mounts before installing any kernel
        during the chroot creation process.
      - Handle /etc/fstab in TCE chroot differently for squeeze and wheezy
        (/dev/pts does not need an entry in fstab on wheezy systems, /var/run
        got relocated to /run).
      - /etc/network/interfaces in wheezy already contains a loopback device
        entry.
      - Mount proc and sysfs from outside chroot, cleanly unmount both in case
        there are more than one mountpoints for sysfs or proc mounted.
      - Do not fail if proc or sysfs are already mounted within chroot.
      - Allow thin client management (x2gothinclient_shell,
        x2gothinclient_upgrade) while thin clients are in use.
      - Disable kms for radeon and i915 graphics adapters.
      - x2gothinclient_shell now does not affect boot behavious of the TCE
        machines anymore, thus, removing the notification output when
        launching the X2Go TCE maintenance shell.
      - Drop i686 kernel support, use i486 kernel by default. In Debian wheezy
        we only find a 686-pae kernel which fails on some (virtual)   
hardware (e.g.
        virtualbox).
      - Make sure that kernel + initrd symlinks are relative symlinks.
      - Keep mounts for /proc and /dev/pts with option noauto for   
mounting inside
        of chroot. They are not needed during TCE boot.
      - Make the SSH daemon listen on IPv4 localhost address only.
      - Provide /dev/pts inside chroot.
      - Move configuration template from /usr/share/tce to /usr/share/tce/etc.
      - Add direct FreeRDP support for defaults TCE installation.
      - Add empty known_host file for FreeRDP.
      - Start with US keyboard as default keyboard layout.
      - Only mount /proc, /sys, /dev/pts inside chroot if not already mounted.
      - Xorg appears as /usr/bin/X in ps ax output. Make sure it gets detected.
      - Provide a README.hostname file in doc folder of   
x2gothinclientmanagement.
      - For TCE stations with multiple heads, align heads next to each other
        in order of appearance in xrandr.
      - Fix multi-head detection failures where xrandr writes output to stderr
        (closes upstream issue #48).
      - Rename x2goclient user to ,,x2gothinclient'' user (system user  
  account).
        Make sure that the system user account gets created during
        x2gothinclient_create and during installation of the x2gothinclient
        package (closes upstream issue #47).
      - x2gothinclient_create: replace /home by /var/lib/x2gothinclient in
        /etc/fstab template.
      - x2gothinclient_update: make sure config target folders exist.
      - x2gothinclient_create: syntax fix, spotted by Thomas Güttler   
(Fixes: #95).
      - Export $LANG and $LANGUAGE to TCE daemon.
      - Use qx instead of open3 to launch x2goclient. (Fixes: #66).
      - Only make x2gousbmount and x2gognupgccid scripts functional if
        x2gothinclientd is running.
      - When finishing x2gothinclientd, wait when killing processes till all
        processes have vanished. Only kill processes owned by user   
x2gothinclient.
      - When finishing x2gothinclientd, make sure no dbus-* processes remain.
      - Unmount /proc, /sys and /dev/pts before doing x2gothinclient_cleanup.
      - Add README.qemu that explains how to test the X2Go TCE with qemu.
        (Fixes: #115).
      - Fix code that turns absolute symlinks into relative symlink   
for /vmlinuz
        and /initrd.img.
      - Fix shutdown button failures.
      - TCE management: Do an apt-get clean after TCE creation/upgrade.
      - TCE creation: fix installation path of FreeRDP's known_hosts file.
      - TCE creation: install the TCE from the nightly builds while this
        project is not yet released. (Fixes: #251).
      - TCE creation: default to wheezy for creating new TCE environments.
    * /debian/control:
      + Maintainer change in package: X2Go Developers   
<x2go-dev <at> lists.berlios.de>.
      + Priority: optional.
      + Add dependency (x2gothinclient bin:package): x11-xserver-utils  
  (for xrandr
        support).
      + Add dependency (x2gousbmount, x2gocdmanager): libfile-path-expand-perl.
      + Bump Standards to 3.9.3 (no changes needed).
      + Remove TCE tools (vim, mc, ...) from Recommends: field,   
install those via
        x2gothinclient_create. Add pulseaudio, dbus-x11, policykit-1   
to Depends:
        field.
    * /debian/rules:
      + Fix lintian issue: debian-rules-missing-recommended-target build-arch
      + Fix lintian issue: debian-rules-missing-recommended-target build-indep
    * /debian/x2gothinclient.examples:
      + Fix src location of example config files.
    * /debian/x2gothinclient.install:
      + Install TCE config files into /etc/x2go by default.
    * /debian/x2gothinclientmanagement.manpages:
      + Make sure all man pages for bin:package x2gothinclientmanagement get
        installed into package.
    * /debian/x2gothinclient.init:
      + Update pointer to X2Go TCE documentation on http://wiki.x2go.org.
    * /debian/x2gothinclient.postrm:
      + On action=purge, wait for 20s until x2gothinclientd has stopped.
    * /debian/po/*:
      + Use po-debconf for translating debconf templates. Add German debconf
        translation.
    * Launch X2Go TCE via /etc/X11/default-display-manager. Add   
debconf template
      to handle default display manager selection. Inspired by Debian's gdm
      package.
    * Only start X2Go CD Manager if x2gothinclientd is the default display
      manager.
  .
    [ Oleksandr Shneyder ]
    * New upstream version (1.1.0.0):
      - Use expand_file from File::Path::Expand to detect full path
        of ~x2gothinclient/.halt.
_______________________________________________
X2Go-Dev mailing list
X2Go-Dev <at> lists.berlios.de
https://lists.berlios.de/mailman/listinfo/x2go-dev

Gmane