2 Jul 2008 11:47
Re: [BUG?] Samsung HD103UJ shows "Aborted by host" for all old self-test log entries
David Greaves <david <at> dgreaves.com>
2008-07-02 09:47:48 GMT
2008-07-02 09:47:48 GMT
resend : I don't see this in the archives and got no reply... David Greaves wrote: > Hi > > There is a bug of some sort with all of my Samsung HD103UJ (1Tb) drives. > They all show "Aborted by host" for all old self-test log entries. > > Obviously smartctl works fine on other drives so it's probably a Samsung bug :) > I've tried the various Samsung flags even though the description of them didn't > seem to be relevant here. Maybe another workaround is needed? > I can perform tests if required. > > I see the behaviour on 2.6.18 and 2.6.25.4 > > Sample > smartctl -a /dev/sdc > shown below. > > This drive is being RMAed but I have 9 in total of various firmwares 1AA01109 > 1AA01110 1AA01112 and they all show the same problem. > > You can see that all old errors show "Aborted by host" and don't show the LBA error. > Some of the errors really would have been power-cycles (this machine > power-cycles by design) but the 90% and 20% values are failures and would have > show a similar Completed: Read Failure message at the time. > > > David Greaves > > > > smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen > Home page is http://smartmontools.sourceforge.net/ > > === START OF INFORMATION SECTION === > Device Model: SAMSUNG HD103UJ > Serial Number: S13PJ1KQ308649 > Firmware Version: 1AA01109 > User Capacity: 1,000,204,886,016 bytes > Device is: In smartctl database [for details use: -P show] > ATA Version is: 8 > ATA Standard is: ATA-8-ACS revision 3b > Local Time is: Thu Jun 26 10:20:11 2008 BST > > ==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details. > > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > > General SMART Values: > Offline data collection status: (0x00) Offline data collection activity > was never started. > Auto Offline Data Collection: Disabled. > Self-test execution status: ( 114) The previous self-test completed having > the read element of the test failed. > Total time to complete Offline > data collection: (11465) seconds. > Offline data collection > capabilities: (0x7b) SMART execute Offline immediate. > Auto Offline data collection on/off support. > Suspend Offline collection upon new > command. > Offline surface scan supported. > Self-test supported. > Conveyance Self-test supported. > Selective Self-test supported. > SMART capabilities: (0x0003) Saves SMART data before entering > power-saving mode. > Supports SMART auto save timer. > Error logging capability: (0x01) Error logging supported. > General Purpose Logging supported. > Short self-test routine > recommended polling time: ( 2) minutes. > Extended self-test routine > recommended polling time: ( 192) minutes. > Conveyance self-test routine > recommended polling time: ( 21) minutes. > SCT capabilities: (0x003f) SCT Status supported. > SCT Feature Control supported. > SCT Data Table supported. > > SMART Attributes Data Structure revision number: 16 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED > WHEN_FAILED RAW_VALUE > 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - > 29 > 3 Spin_Up_Time 0x0007 076 076 011 Pre-fail Always - > 7890 > 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - > 133 > 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - > 0 > 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - > 0 > 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - > 10287 > 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - > 524 > 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - > 0 > 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - > 0 > 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - > 133 > 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - > 29 > 183 Unknown_Attribute 0x0032 100 100 000 Old_age Always - > 0 > 184 Unknown_Attribute 0x0033 100 100 099 Pre-fail Always - > 0 > 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - > 29 > 188 Unknown_Attribute 0x0032 100 100 000 Old_age Always - > 0 > 190 Airflow_Temperature_Cel 0x0022 066 062 000 Old_age Always - > 34 (Lifetime Min/Max 19/34) > 194 Temperature_Celsius 0x0022 064 061 000 Old_age Always - > 36 (Lifetime Min/Max 19/36) > 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - > 818619 > 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - > 0 > 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - > 0 > 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - > 1 > 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - > 0 > 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - > 0 > 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - > 0 > > SMART Error Log Version: 1 > No Errors Logged > > SMART Self-test log structure revision number 0 > Warning: ATA Specification requires self-test log structure revision number = 1 > Num Test_Description Status Remaining LifeTime(hours) > LBA_of_first_error > # 1 Short offline Completed: read failure 20% 447 4239 > # 2 Extended offline Aborted by host 90% 424 - > # 3 Short offline Aborted by host 20% 423 - > # 4 Short offline Aborted by host 20% 411 - > # 5 Short offline Aborted by host 00% 387 - > # 6 Short offline Aborted by host 00% 359 - > # 7 Extended offline Aborted by host 70% 329 - > # 8 Short offline Aborted by host 00% 310 - > # 9 Extended offline Aborted by host 60% 229 - > #10 Short offline Aborted by host 00% 215 - > #11 Short offline Aborted by host 00% 187 - > #12 Short offline Aborted by host 00% 146 - > #13 Extended offline Aborted by host 00% 126 - > #14 Short offline Aborted by host 00% 122 - > #15 Short offline Aborted by host 00% 108 - > #16 Short offline Aborted by host 00% 83 - > #17 Short offline Aborted by host 00% 50 - > #18 Extended offline Aborted by host 00% 16 - > #19 Short offline Aborted by host 00% 9 - > > SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1 > SMART Selective self-test log data structure revision number 0 > Warning: ATA Specification requires selective self-test log data structure > revision number = 1 > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > 1 0 0 Not_testing > 2 0 0 Not_testing > 3 0 0 Not_testing > 4 0 0 Not_testing > 5 0 0 Not_testing > Selective self-test flags (0x0): > After scanning selected spans, do NOT read-scan remainder of disk. > If Selective self-test is pending on power-up, resume after 0 minute delay. > ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08
RSS Feed