Re: feature request easy diseqc setup and channelscan for vdr

On 1 Feb 2010, at 22:24, abbe normal wrote:
> 
> On 2/1/10, VDR User <user.vdr <at> gmail.com> wrote:
>> On Mon, Feb 1, 2010 at 7:12 AM, Halim Sahin <halim.sahin <at> t-online.de> wrote:
>>> Hi List and Klaus,
>>> 
>>> It would be really nice if vdr could support diseqc setup directly in
>>> vdr.
>>> 
>>> I don't know if this can be done by a plugin but the current solution is
>>> difficult for endusers.
>>> Setting a diseqc.conf needs some knowledge in diseqc and it's commands.
>>> A simple interface for creating a diseqc.conf can improove the
>>> usability of vdr!
>> 
>> Personally I think adding support for multiple diseqc switches is a
>> more important feature as I've noticed several users asking how to do
>> this in VDR -- which it unfortunately doesn't support.  I think this
>> is actually one of the reasons some guys fumble around trying to
>> cascade their diseqc switches.  However, not all switches can be
>> cascaded and so they're left stuck.  Can't cascade, and no support for
>> multiple switches.
>> 
>> 
> 
> hey guys
> 
> i agree multi cards should be able to use mutli diseqc configs... or
> at least be able to assign them to different switches that could be
> used... would be nice to add more dishes and lnbs to my setup... would
> like to do c and ku band dvb as well as have at least 2 to 3 fixed
> dishes with lnbs on them now im limited to 4 max or use a very costly
> switch...
> 
> abby

Dear all,

I have a diseqc-patch I that hacked together a couple of years ago relating to multi-cards/multi-switches
that has served my purpose well.  It may not be the best way, it may even be the wrong way.  I will drag it out of
the VDR box for all to see but that will not be for a couple of days.

MOTIVATION

I have three LNBs (28.2/5, 19.2, 13.0) and two cards, each card attached to a 4-way diseqc switch.  Despite
the switches being the same model and bought at the same time each one responds to a different set of diseqc
commands to change LNB.  IIRC one seemed to behave as a cascade of 2-way switches, the other responded to the
more usual commands for a 4-way switch.

DESCRIPTION

Enter my hack.  It allows diseqc commands to be defined on a per-card basis (numbered 1, 2, ...).  How you
determine which number corresponds to which card is left as an exercise for the reader (hint: the margin
may not be big enough).  These defines are placed in 'diseqc-multi.conf' and start with the card number but
are otherwise the same format as those found in 'diseqc.conf'.

CONFIGURATION

Configuration options within VDR are:

- use only the diseqc.conf defines, 
- use only the diseqc-multi.conf, 
- use the disqc-multi.conf if a card definition appears otherwise use the diseqc.conf defines.

CAVEATS

For my purpose this patch works well.  I am aware there exist other multi-satellite/multi-card patches
that may address a similar problem but I haven't used them.

You'll have to wait a couple of days before I can pull it off my vdr box.  Current version works with
vdr-1.7.11.  This patch has survived with minimal/no changes from at least the first vdr-1.6 releases.

Sorry to whet your appetites without satiating them.

Ian.
_______________________________________________
vdr mailing list
vdr <at> linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr