1 Aug 2003 10:22
Re: loading application on redboot
Satish Kumar <satish <at> bvt.sc.sanyo.co.jp>
2003-08-01 08:22:50 GMT
2003-08-01 08:22:50 GMT
well, actually my serial driver is set to baudrate 115200.. will the GDB work on this baudrate..? satish On Fri, 01 Aug 2003 05:34:08 +0100 Jonathan Larmour <jifl <at> eCosCentric.com> wrote: > Satish Kumar wrote: > > Hi, > > > > using hyperteminal i have downloaded hello.srec at 0x40000 and this > > time when i tried "go 0x40040" redboot hangs..i see no output on the > > hyper terminal. > > > > btw, i tried another method i.e using arm-elf-gdb..after powering on my > > system, on "arm-elf-gdb -nw hello" ;i get the following output: > > > > $ arm-elf-gdb -nw hello > > GNU gdb 5.3 (eCosCentric) > > Copyright 2002 Free Software Foundation, Inc. > > GDB is free software, covered by the GNU General Public License, and you are > > welcome to change it and/or distribute copies of it under certain conditions. > > Type "show copying" to see the conditions. > > There is absolutely no warranty for GDB. Type "show warranty" for details. > > This GDB was configured as "--host=i686-pc-cygwin --target=arm-elf"... > > (gdb) target remote com1 > > Remote debugging using com1 > > Ignoring packet error, continuing... > > Ignoring packet error, continuing... > > Ignoring packet error, continuing... > > Couldn't establish connection to remote target > > Malformed response to offset query, timeout > > (gdb) quit > > > > i m not sure if the problem is with building application or with > > the redboot_ROM monitor. > > This probably means your application isn't built for the right address in > RAM. Do arm-elf-objdump -h on the (ELF) executable to see what the load > address is, and compare that against your memory map. > > Jifl > -- > eCosCentric http://www.eCosCentric.com/ The eCos and RedBoot experts > --[ "You can complain because roses have thorns, or you ]-- > --[ can rejoice because thorns have roses." -Lincoln ]-- Opinions==mine -- Satish Kumar <satish <at> bvt.sc.sanyo.co.jp> -- -- Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos and search the list archive: http://sources.redhat.com/ml/ecos-discuss
RSS Feed