EZ Bleed is a bleeding system that works off tire pressure.  You hook it to a spare tire, with about 14lbs of pressure, which goes to a fluid bottle.  A line from the fluid bottle goes to a cap that fits on to the top of the Lockheed resevoir.  It is the same size as the resevior's cap, but has an fitting for the line from the fluid bottle.  I then am releasing the bleeder on the slave, with a tube that goes to a glass jar with fluid, so as to eliminate the risk of sucking in air that way.  I hold the bleeder open until there are no bubbles in the tube.  Shut the bleeder and release the air supply hose from the spare tire.  When done, the resevoir is filled to the top of the filler neck.  But because of the angle of the master cylinder, there is alwa ys a little airspace back toward the firewall.

-----Original Message-----
From: Stefan Vapaa <turbo-ooAQcTXgxthWk0Htik3J/w@public.gmane.org>
To: vSAAB-hHKSG33TihhbjbujkaE4pw@public.gmane.org
Sent: Wed, 1 Apr 2009 12:42 pm
Subject: Re: [vSAAB] clutch won't bleed



__._,_.___


__,_._,___